Canon imageRUNNER ADVANCE C9075S PRO User Manual page 8

Instructions for safe use
Grounding
Warning
•
Connect the power cord to an electrical outlet (wall socket) that is equipped with a
grounding terminal.
• This equipment was not designed for connection to an IT power system. An IT power
system is a voltage network in which the neutral wire is not grounded.
Installation
Warning
• Make sure that the machine is placed on a level, horizontal surface of sufficient strength.
• Do not place this machine on an unstable or tilted bench.
• Do not place this machine in a location that is subject to lots of vibrations and shocks.
• Do not use flammable sprays, liquids or gases near this product, because this could
cause a fire.
Note
• It is recommended that you connect only copy-control products (or other products)
which meet the (inter)national product safety and radio frequency interference
standards. Only use an attachment cable as specified by the manufacturer.
Ventilation
Caution
•
Do not block the machine's ventilation openings.
• Do not place the machine in rooms which are too small and insufficiently ventilated.
• Be sure to allow a clearance of 60 mm or more at the back of this machine for the
ventilation duct.
Actions in response to troubles
Warning
• When a piece of metal, water or any other similar foreign matter gets inside the
machine, immediately turn OFF the power switch and unplug the power cord from
the power outlet. Then call your authorized service representative.
• Immediately stop using the machine if the machine becomes excessively hot, emits
smoke, or produces unusual odors or noises. Immediately turn OFF the power switch
and unplug the power cord from the power outlet. Then call your authorized service
representative.
Caution
• Stop using the machine if the machine was dropped or a cover was damaged.
Immediately turn OFF the power switch and unplug the power cord from the power
outlet. Then call your authorized service representative.
8 Chapter 1 - Instructions for safe use