Canon imageRUNNER ADVANCE C9075S PRO User Manual page 7

Disassemble and modification
Warning
•
Do not remove covers and panels which are fixed to the machine. Some machines
have a high-voltage component or a laser beam source inside that could cause electrical
shock or blindness
• Do not modify this machine, because this could cause a fire, electrical shock or
breakdown. If the machine contains a laser, the laser beam source could cause blindness.
Caution
• Do not place any liquids on the machine.
• To avoid any risk, only properly qualified and authorized service technicians are allowed
to modify the machine.
• Do not bridge any mechanical or electrical circuit breakers.
Power cord
Warning
• Do not scratch, wrap, heat, twist, bend, place a heavy object on or cause any other
damage to the power cord. The use of a damaged power cord (exposed core wire,
broken wire, for example) could result in a fire or breakdown. If you find any of these
conditions, immediately turn OFF the power switch and unplug the power cord from
the power outlet. Then call your authorized service representative.
• Only use the mains connector cable that was supplied with the machine.
Power source
Warning
• Put the power plug directly into a wall socket that has the same configuration as the
plug. The use of an adapter leads can result in an inadequate power supply. If a proper
wall outlet is not available, ask a qualified electrician to carry out the installation.
• Do not connect the machine to a mains voltage that differs from the value as stated
on the power marking label.
• Do not use a multiple outlet adapter or an extension lead. Contact your authorized
service representative if an extension lead is required.
Note
• If connection to a different mains voltage is required, contact your authorized service
representative.
Power plug
Warning
• For machines that are connected via a wall socket: Place the machine close to a wall
socket that is easily accessible. The power plug is intended to serve as a disconnect
device.
Instructions for safe use
Chapter 1 - Instructions for safe use 7