Canon PIXMA MP150 User Manual page 94

Cause
The size of the print data is too large.
The hard disk does not have enough
available space.
When Copying
Cause
The document is not loaded
correctly.
The quality (image quality) displayed
on the LCD is not suitable for the
document. (MP170)
The document is not loaded with the
side to be copied face down.
The document or photograph set on
the Platen Glass was printed from
your machine.
The Platen Glass or inner side of the
Document Cover is dirty.
92
Troubleshooting
Check the size of the print data. For Windows XP and Windows 2000, if the
size of the data is too large, part of it may be lost. When the spool format
is EMF, follow the procedure below.
1. Open the printer properties dialog box.
2. On the [Page Setup] tab, click [Print Options].
3. Select the [Reduce spool data size] check box, and click [OK].
Note
When Reduce spool data size is set, the print quality may be degraded.
You may need to increase the amount of free space on the disk by deleting
any unnecessary files.
Check that the document is loaded correctly on the Platen Glass.
See "Loading Documents" on page 15.
Set the image quality suitable for the document.
See "Adjusting Image Quality" on page 29.
When loading the document on the Platen Glass, the side to be copied
should be face down.
Image quality may be poor if you copy a printed document or photograph.
Instead, reprint the photograph directly from the digital camera, or the
document from your computer.
Clean the Platen Glass or inner side of the Document Cover.
See "Cleaning The Platen Glass And Document Cover" on page 82.
Action
Action
Chapter 10