Telephone Line Setting
Telephone Line Setting
The machine is set to automatic detection mode. With some environments and telephone
lines, the machine may not detect the proper telephone line type. If this happens, follow the
procedure below to set the telephone line type. The default setting is <Auto>.
Connect the telephone line cable before turning ON the machine, if you use the automatic detection mode.
1
Press
2
Press the right Any key to select
<Additional Func.>.
3
Use [▼], [▲] or
<Communications Settings>, then press
[OK].
1-20
(Main Menu).
(Scroll Wheel) to select
4
Use [▼], [▲] or
<Fax Settings>, then press [OK].
5
Use [▼], [▲] or
<User Settings>, then press [OK].
(Scroll Wheel) to select
(Scroll Wheel) to select