Canon Color imageCLASS MF8450c Basic Operation Manual page 370

5
Press the right Any key to select <Index
Print>.
6
Use [▼], [▲] or
the desired memory medium, then press
[OK].
– You can not select multiple memory media or
folders at once.
– If you press the right Any key to select <Set>,
only the data saved outside folders will be
printed.
(Scroll Wheel) to select
Printing from Memory Media (Direct Print)
7
Use [▼], [▲] or
the desired folder, then press the right
Any key to select <Set>.
If the selected folder contains a subfolder, the
files in that folder will not be printed.
The maximum depth of a sub-folder you can
select is 20.
8
Use [▼], [▲] or
the desired setting, then press [OK].
Press [OK] after making each setting.
– <Color>: Selects full color or B&W.
– <Drawer 1>: Selects paper source for printing.
9
Press (Start).
When printing is complete, remove the memory
media.
Do not remove the memory medium when the
access lamp is blinking. The blinking lamp
indicates that the machine is accessing the data in
the memory medium. The data may be damaged
if you remove the memory medium at this point.
(Scroll Wheel) to select
(Scroll Wheel) to select
7-19