Certificate Registration - Canon VB-M40 Operation Manual

Certificate Registration

In order to use [Admin Tools] and [Admin Viewer], you
must first install the two certificates issued by Canon Inc.
on your PC. The certificates are stored on the Setup
CD-ROM. Follow the procedure below to register the
certificates using Internet Explorer.
Double-click admintools1 found in the [Certificate]
1
folder in the [Applications] folder on the bundled Setup
CD-ROM.
Click [Install Certificate].
2
3 Click [Next] in the [Certificate Import Wizard].
Follow the procedure below to import the certificate on
4
the [Certificate Store] screen.
(1) Select [Place all certificates in the following store].
(2) Click [Browse], select [Intermediate Certification
Authorities], and click [OK].
(3) Click [Next].
5 Click [Finish] to close the Certificate Import Wizard.
When certificate registration is complete, a message,
"The import was successful", will appear.
Double-click admintools2 found in the [Certificate]
6
folder in the [Applications] folder.
The [Certificate] dialog box will appear.
Note
PCs configured after July 17, 2011 will display the following
window. You can continue certificate registration without issue.
Click [Install Certificate].
7
8 Click [Next] in the [Certificate Import Wizard].
Accessing the Top Page of the Camera
Follow the procedure below to import the certificate
9
on the [Certificate Store] screen.
(1) Select [Place all certificates in the following store].
(2) Click [Browse], select [Trusted Publishers], and click
[OK].
(3) Click [Next].
Click [Finish] to close the Certificate Import Wizard.
10
When certificate registration is complete, a message,
"The import was successful", will appear.
4
4
-3