Canon ColorPASS-Z5000 Getting Started page 93

71 Installing ColorPASS software and fonts
T
O CONFIGURE A CONNECTION FOR
1. Launch the utility by double-clicking its icon.
The Choose Printer Device dialog box appears.
2. If you have previously configured a connection to the ColorPASS, then you are ready to
use ColorWise Pro Tools. If you have not configured a connection, click Add.
3. Enter the appropriate information for the ColorPASS.
—Enter a name for the ColorPASS. This can be any name you wish; it does
Nickname
not have to match the actual server name of the ColorPASS.
The nickname cannot contain any of the following seven characters:
N :
OTE
[ ] _ " ' <space> <tab>
—Choose the type of network protocol you are using from the pop-up menu.
Protocol
ColorWise Pro Tools is supported only with TCP/IP, so no selection is necessary.
C W P T :
OLOR ISE RO OOLS