Command Workstation; Docbuilder Pro - Canon ColorPASS-Z5000 Getting Started
Includes fiery software
Hide thumbs
Also See for ColorPASS-Z5000:
- Configuration manual (168 pages) ,
- Printing manual (134 pages) ,
- Color manual (214 pages)
Table of Contents
Advertisement
xxi System requirements
Command WorkStation
To run the Command WorkStation application from a remote workstation, you need:
• A Windows-based computer with a 200MHz Pentium processor
• Windows 95/98/Me/2000 or Windows NT 4.0 with NT Service Pack 5
• TCP/IP networking protocol installed
• A video adapter card with at least 2MB of video memory
• At least 32MB of RAM
• An 850MB (or greater) hard disk drive
• A 2
CD-ROM drive
x
• A 17" monitor that supports 16-bit color at a minimum resolution of 1024
DocBuilder Pro
To run the Command WorkStation application with DocBuilder Pro, you need
• A Windows-based computer with a 333MHz Pentium processor
• Windows 95/98/Me or Windows NT 4.0 with NT Service Pack 4 or 5
• TCP/IP networking protocol installed
• A video adapter card with at least 2MB of video memory
• 64MB of RAM
• An 850MB (or greater) hard disk drive
• 90MB of available hard disk space
• A 2
CD-ROM drive
x
• A 17" monitor that supports 16-bit color at a minimum resolution of 1024
x
768
x
768
Advertisement
Table of Contents
