Replacing The Toner Cartridge - Canon imageCLASS MF4450 Basic Operation Manual

7
Insert the toner cartridge.
Fit the protrusions (A) on each side of the toner cartridge into the
guides located on each side of the machine, and then slide the
toner cartridge into the machine until the toner cartridge meets
the back of the machine.
8
Close the toner cover.
If you cannot close the toner cover
Ensure that the toner cartridge is properly set in the machine.
Do not try to forcefully close the toner cover, as this may damage
the machine.
9
Lower the scanning platform.

Replacing the Toner Cartridge

Before replacing toner cartridges, see "Precautions when
Replacing Toner Cartridge" (→P.8-11)
NOTE
Checking the toner cartridge status
You can check the level of remain toner on the operation panel.
"Checking the Toner Level" (→P.8-8)
1
Hold the operation panel.
8-10
(A)
(A)
2
Lift the scanning platform.
If you cannot lift the scanning platform
Ensure that the feeder is completely closed.
Do not try to forcefully lift the scanning platform, as this may
damage the machine.
* If you set thick documents such as a book, the feeder may not
be completely closed. Remove the documents.
3
Hold the grip on the left front side of the toner
cover.
4
Open the toner cover.