Setting Wi-Fi Direct - Kyocera ECOSYS P2335dn Operation Manual

Installing and Setting up the Machine > Network Setup

Setting Wi-Fi Direct

When the wireless network function is available on the machine, setting Wi-Fi Direct enables you to print from the Wi-Fi
Direct environment. The configuration methods are as follows:
Configuration Method
Using the Wi-Fi Direct mode
from the handheld device
Using the Wi-Fi mode and
detecting the machine from
the handheld device
Using the Wi-Fi mode and
WPS push button on the
handheld device
*1 When using Wi-Fi Direct mode, if the computer or handheld device is already connected to another network using the Wi-Fi
mode, you cannot execute the job because the machine is not detected from the application.
Using the Wi-Fi Direct Mode from the Handheld Device
Here, we'll explain the procedures for connecting to Android 4.4 or more handheld devices.
1
2
3
4
You can configure the connection using the Wi-Fi Direct
*1
mode from the computer or handheld device.
You can configure the connection using the Wi-Fi mode
from the computer or handheld device, detect and connect
the machine as an access point.
You can configure the connection using the Wi-Fi mode
from the computer or handheld device with WPS push
button, and then connect the network by pressing WPS
push button on both the machine and the computer or
handheld device.
Enable Wi-Fi Direct mode.
Simultaneously press the [Go] key and [Wi-Fi Direct] key on the operation panel for 3
seconds.
NOTE
You can also enable Wi-Fi Direct from Command Center RX.
Command Center RX User Guide
Turn the machine OFF and then ON.
Power On/Off (page 2-9)
Select the host name (KMxxxxxx) on the Wi-Fi Direct menu of
the handheld device.
Press the [Wi-Fi Direct] key on the operation panel for 1
second, when the [Wi-Fi Direct] key is blinking.
NOTE
This operation means it needs the first confirmation for the Wi-Fi Direct connection from the
handheld device.
The network between this machine and the handheld device is configured.
Description
2-20
Reference Page
Using the Wi-Fi Direct Mode from
the Handheld Device (page 2-20)
Using the Wi-Fi Mode and
Detecting the Machine from the
Handheld Device (page 2-21)
Using the Wi-Fi mode and WPS
Push Button on both the
Computer or Handheld Device
(page 2-22)