Yamaha YZF-R1 Owner's Manual page 38

Instrument and control functions
"YRC Setting"
1
This module allows you to customize
the four YRC modes
2 MODE-B, MODE-C, MODE-D by ad-
justing the setting levels (or on/off sta-
tus as applicable) of YRC items PWR,
3
TCS, SCS, LCS, QSS, and LIF. For
YZF-R1M, you can select the ERS
4
mode to be associated with each YRC
mode, and also adjust the setting levels
of the ERS modes.
5
TIP
6 
TCS has 9 setting levels and ERS
has 6 modes.

Whenever there are more selec-
7
tions (setting levels or modes)
available than can be shown on
8
the screen at one time, a scroll bar
will appear to notify you that addi-
9 tional selections are available by
scrolling.
10
PWR
Select PWR-1 for the most aggressive
11
throttle response, PWR-2 and PWR-3
for smoother throttle grip/engine re-
12
sponse, and use PWR-4 for rainy days
or whenever less engine power is desir-
able.
MODE-A,
5
1. PWR 1
2. PWR 2
3. PWR 3
4. PWR 4
5. Throttle valve opening
6. Throttle grip operation
TCS
This model uses a variable traction
control system. For each setting level,
the further the vehicle is leaned over,
the greater the amount of traction con-
trol (system intervention) is applied.
There are 9 setting levels available.
Setting level 1 applies the least amount
of overall system intervention, while
setting level 9 applies the greatest
amount of overall traction control.
TIP

2
3
1
4 
6
TCS
1. System intervention
2. Lean angle
SCS
SCS can be set to OFF, 1, 2, and 3.
OFF turns the slide control system off,
setting level 1 provides the least
4-16
TCS can only be turned on or off
via the main screen using the
mode switch.
When TCS has been turned off,
TCS, SCS, LCS, and LIF will be
set to OFF and cannot be adjust-
ed. When TCS is turned on again,
these related-traction control func-
tions will return to their previous
setting levels.
1
2
9
8
7
6
5
4
3
2
1