3Riser Card - HP Compaq dc7100 DT Reference Manual

7.10.3 Riser Card
1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock
7.2, "Unlocking the Smart Cover
2. Prepare the computer for disassembly
3. Remove the computer access panel
4. Remove the expansion card cage
5. Remove the two screws that secure the riser card to the expansion card cage 1, then remove
the card 2.
To install the riser card, reverse the removal procedure.
The riser card is not spared separately at the time this document was released.
Service Reference Guide, dc7100
Removal and Replacement Procedures— Small Form Factor (SFF) Chassis
Lock").
(Section 7.1, "Preparation for
(Section 7.5, "Computer
(Section 7.10.1, "Expansion Card
361288-003
(Section
Disassembly").
Cover").
Cage").
7–25