Advertisement
Rinse out with fresh water if the
l
kettle has not been used for
more than 2 days.
2 Close the lid by pushing down
on the lid.
3 Plug in and switch on. The
power on light
4 Your kettle will boil and switch
off automatically. To re-boil,
wait a few seconds - the on/off
switch needs time to reset.
Note - To interrupt the boiling
ensure that the switch is in the
off position before removing
from the powerbase.
If you experience problems
l
with your kettle switching on
and off during use or switching
off before boiling, check that
the flat element is free from
scale - see "descaling".
Your kettle is fitted with a filter
l
to hold back limescale particles.
If you find drops of water under
l
your kettle, do not worry - it is
just condensation.
Boil-dry protection
If you switch on with too little
l
water, your kettle will cut
out automatically. Switch off,
remove from the powerbase
and let it cool down before
re-filling. When it has cooled
down, the switch will reset itself.
Care and cleaning
Before cleaning, unplug your
l
kettle and let it cool down.
The outside and powerbase
Wipe with a damp cloth, then
l
dry. Do not use abrasives -
they will scratch the metal and
plastic surfaces.
The inside
Wipe with bicarbonate of
l
soda on a damp cloth. Rinse
thoroughly.
Even though your kettle comes
l
with a filter, you still need to
clean the inside (and the filter)
regularly.
English
will come on.
4
(B)+(C)
The filter
1 Open the lid.
2 Unclip and slide out the filter
(B)
.
3 Either rinse under the tap
or use a soft brush or when
descaling your kettle, drop the
filter in too. Rinse thoroughly.
4 Replace the filter by locating
the front of the filter into the
spout area then clip into place
(C)
.
Descaling
Regular descaling of the flat
l
element will improve the
performance of your kettle.
If the kettle is not descaled
regularly the build up of
limescale may result in the
following:
problems may be
l
experienced with the kettle
switching on and off during
use or switching off before
boiling.
the kettle may take longer to
l
boil.
the flat element may be
l
damaged.
Please note: Failure to descale
your kettle may invalidate your
guarantee.
When limescale starts to build
l
up on the heating element, buy
a suitable descaler and descale
your kettle. After descaling, boil
with fresh water several times
and discard. Clean any descaler
off the kettle - it can damage
the parts.
Some regions of the country
l
have chalky water. This makes
boiled water look cloudy and
leaves a deposit on the side of
the kettle. This is normal but
can be removed with regular
cleaning.
Alternatively, to reduce
l
limescale build up, use filtered
water to fill your kettle.
5
Advertisement
