Change The Display Information; Troubleshooting - Kenwood DPX-M3300BT Instruction Manual

References

Change the display information

Each time you press DISP, the display information changes.
• If the information is unavailable or not recorded, "NO TEXT", "NO INFO", or other information
(eg. station name) appears or display will be blank.
Supplementary display
Source name Display information: Main display (supplementary)
STANDBY Source name (Date)
RADIO Frequency (Date)
For FM Radio Data System stations only:
Station name/Program type (Date)
(Radio text+) Song title (Artist)
back to the beginning
USB For MP3/WMA/AAC/WAV/FLAC files:
Song title (Artist)
(Folder name) File name (Date)
beginning
iPod USB/iPod BT Song title (Artist)
time (Date) back to the beginning
BT AUDIO Song title (Artist)
time (Date) back to the beginning
AUX Source name (Date)
Clock time
Main display
Radio text (Date) Radio text+
Song title (Date) Frequency (Date)
Song title (Album title) Song title (Date)
Playing time (Date) back to the
Song title (Album title) Song title (Date)
Song title (Album title) Song title (Date)

Troubleshooting

Symptom
Sound cannot be heard.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
"PROTECTING SEND SERVICE"
appears.
Source cannot be selected.
The unit does not work at all.
Correct characters are not
displayed.
"ERROR"/"FAILED"
• Radio reception is poor.
• Static noise while listening
File name
to the radio.
Playback order is not as
intended.
Playing
Elapsed playing time is not
Playing
correct.
"READING" keeps flashing.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. (Page 6)
Reset the unit. (Page 4)
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
(page 7), some characters may not be displayed
correctly.
Your steering remote controller is not compatible,
learning may not be completed. Consult your car audio
dealer for details.
Connect the antenna firmly.
USB device, the folders are played in the order of creation
(date and time). The files within each folder are played in
the order of the file name (alphabet).
This depends on the recording process earlier (USB).
• Do not use too many hierarchical levels and folders.
• Reattach the device (USB/iPod/iPhone).
ENGLISH
31