Kenwood DPX-M3300BT Instruction Manual page 28

Installation/Connection
Installing in Toyota cars
Install onto the car brackets using the supplied screws (C) or (D). Use
the mounting holes ( ) or ( ) that fit the car brackets. Then, install the
supplied trim plate (A).
Do the required wiring.
(Page 29)
Dashboard of your car
* Only for illustration purpose.
28
ENGLISH
Car bracket*
Connect external components
No Part
1 Learning steering remote control (Page 25)
2
Output terminals (See the following "Connect external amplifiers via output
terminals".)
3
Microphone input jack (Page 14)
Connect external amplifiers via output terminals
When connecting an external amplifier to the output terminals of this unit,
securely connect the amplifier ground wire to the car chassis to prevent
damage to the unit.
Output terminals 2-way crossover
FRONT: Front output
REAR/SW: Rear/subwoofer output
3-way crossover
Mid Range output
Woofer output