Table of Contents
Advertisement
8. Pre-set Function
1) Set the clock first. (Consult the instruction of clock setting.)
2) Input the cooking program. Three stages can be set at most. Defrosting should not
be set under this function.
Example: If you want to use 10 minutes of 80% microwave power to cook.
a. Keep pressing "
b. Press "
" to confirm the power you need.
c. Turn "
" to select 10 minutes.
Attention: do not press "
3) Press "
", the current time is displayed, and the hour figures will flash.
4) Turn "
" to adjust the hour figures, the input time should be
within 0--23(for 24H) or 1--12(for 12H).
5) Press "
", the minute figures will flash.
6) Turn "
" to adjust the minute figures, the input time should be within 0--59.
7) Press "
" to finish setting, and the current time will be displayed.
8) The buzzer sounds twice when the input time is reached and cooking starts.
If the door is not closed the unit will not operate.
Note: 1. The clock must be set first. Otherwise, preset cooking will not work.
2. Auto menu cooking can be set as one stage cooking only, not as multi-stage.
3. Defrost cannot be set here.
9. Auto Menu Cooking
1) In waiting state, turn "
2) Press "
" to confirm the menu you need.
3) Turn "
" to choose the food weight or portion.
4) Press "
" to start cooking.
Example: If you want to use "Auto Menu" to cook pasta of 150g.
1) In waiting state, turn "
GB
" till "P80" is displayed.
", do the following:
" clockwise to choose the menu from "A1" to "A10".
" clockwise to choose A6.
14
Advertisement
Table of Contents
