Kenwood DMX8021DABS Quick Start Manual page 17

Ñ
3-way speaker system setup
Subwoofer Preout
Mid Range Preout
Tweeter Preout
When connecting to an external amplifier,
connect its ground wire to the car's chassis to
avoid damaging the unit.
Preout
RCA Cable
(Sold separately)
Power amplifier
(optional
accessory)
Input
White
+
White/Black
Gray
+
Gray/Black
Green
+
Green/Black
Purple
+
Purple/Black
NOTE
• For speaker system setup, see 3-way speaker
system setup (P.62) in the Instruction Manual.
• For speaker setup and crossover setup, see
Speaker / X'over setup (P.63) in the
Instruction Manual.
• For how to connect speaker wires to terminals
other than speaker terminals and Preout
terminals, see Connecting the system and
external components (P.17) and Connecting
wires to terminals (P.16).
Speaker
To mid range left
speaker
To mid range right
speaker
To tweeter left speaker
To tweeter right
speaker
Speaker impedance: 4-8 Ω
Ñ
Connecting the system and
external components
16 15
14 13
1
2
3 4 5
1
Accessory 4: Microphone
Dashboard camera interface
2
Connect a Dashboard Camera DRV-N520
(optional accessory). (P.19)
3 When connecting to an external amplifier,
connect its ground wire to the car's chassis to
avoid damaging the unit.
Rear Audio Preout
(Left; White, Right; Red)
Front Audio Preout
(Left; White, Right; Red)
Subwoofer Preout
(Left; White, Right; Red)
4 FM/AM antenna input
AV-IN (for audio) input (ø3.5 mini jack)
5
VIDEO Input (Yellow)
6
Connect a RCA cable (sold separately) to VIDEO
input terminal to use AV-IN (for visual) or Side
(Left or Right) view camera Input (Yellow).
For more information, see To set up the
camera assignment settings (P.53) in the
Instruction Manual.
Front view camera/Dashboard camera
7
input (Yellow). See To set up the camera
assignment settings (P.53) in the
Instruction Manual.
8 Rear view camera input (Yellow)
3rd view camera input (Yellow). See To set up
9
the camera assignment settings (P.53) in
the Instruction Manual.
Connection/Installation
12 11 10
9
8
7
6
English
17