Table of Contents
Advertisement
Appendix A REMCS
A.1 REMCS Settings
This appendix describes REMCS settings.
A.1
REMCS Settings
Customer Information Entry
If you register customer information with the REMCS center, a "registration completion" notification
(sent by e-mail and by letter in an envelope) will be issued to the customer. To avoid problems with
the customer, be sure to check with the customer before entering any customer information.
A.1.1
Preparing the Environment
This section describes the environment and conditions required for connecting to the REMCS center and
starting services.
A.1.1.1
Conditions for Connecting to the REMCS Center
The following conditions must be met to connect the customer's device to the REMCS center.
■ For Internet Connection
-
The customer's device is in an environment that can connect to the Internet.
-
E-mail can be sent via the Internet.
Note
-
Permission to send e-mails via the Internet may be required, depending on the customer's network
environment. For details, check with the customer's network administrator.
Remarks
-
The customer needs to prepare security mechanisms, such as a firewall, as required.
A.1.1.2
Preparing Settings
■ Preparing Network-Related Information
The network-related information shown in
device and setting up the REMCS agent.
Note
-
The contents of the settings depend on the network environment used by the customer.
Appendix A REMCS
Table A.1
is required for making the settings for the customer's
57
C120-0091-02EN
Advertisement
Table of Contents
