Table of Contents
Advertisement
Chapter 3 Web GUI Functions
3.4 Configuration
You can perform the following operations on the [SNMP Trap Settings] screen.
Operation Item
Apply
Reset
Test Trap
Changing SNMP Trap Setting Information
1.
To change the setting information for a trap destination, check its check box.
2.
Specify each item, such as [Community/User], [IP Address], and [SNMP Version].
Input Item
IP Address
SNMP Version
Figure 3.14 [SNMP Trap Settings] Screen
Table 3.27 Operation Items on the [SNMP Trap Settings] Screen
Change SNMP trap setting information. For the procedure, see
SNMP Trap Setting
Restores the currently set SNMP trap information.
Send a test trap to all of the set trap destinations. For the procedure, see
"Sending a Test
Table 3.28 Specifying SNMP Trap Setting Information
Specify the IP address of an SNMP trap destination in the xxx.xxx.xxx.xxx
format. xxx is a value between 0 and 255.
Specify the SNMP version.
Description
Information."
Trap."
Description
36
"Changing
C120-0091-02EN
Advertisement
Table of Contents
