Pioneer PDP-503CMX Service Manual page 118

PDP-503CMX, PDP-503MXE, PDA-5002
6.4.3 GET Command
Command Description
Command
GAJ Output data of an electronic VR adjustment value and a drive system adjustment value
GPW Output data to be related to white balance adjustment of the panel
GS1 Output data such as version information, hour meter and pulse meter
GS2 Output data of power down, temperature and dew drop information
GAS Output data to be related to picture quality setting of SLOT
GAR Output data to be related to picture quality (RGB1 of the factory menu)
GPD Output POWER DOWN information (past eight times)
GPS Output a SCREEN parameter
GWB Output a parameter of PICTURE and WHITE BALANCE
GSS Output various setting of the SET UP item of menu mode / integrator mode
GSO Output various setting of the OPTION item of menu mode / integrator mode
GAJ:
Output data of an electron VR adjustment value and a drive system adjustment value
• Output it according to transmission order and size of the table below.
• Command is invalid except RS-232C factory adjustment mode.
Order
1 Setting mode of electric power upper limit value
2
Electric power upper limit value
3
(ABL)
4 Vsus adjustment value
5 Vofs adjustment value
6 V-SUS-B adjustment value
7 V-SUS-G adjustment value
8 Y-SUS-B adjustment value
9 Y-SUS-G adjustment value
(Note 1) : When performed in reference mode selection, offset data outputs the same value as the reference data.
GPW
(Get Panel White balance)
• Output it according to transmission order and size of the table below.
• Command is invalid except RS-232C factory adjustment mode.
Order
1 Panel color temperature mode
2
Gain of W/B adjustment value
3
Red
4
Gain of W/B adjustment value
5
Green
6
Gain of W/B adjustment value
7
Blue
8
Offset of W/B adjustment value
9
Red
10
Offset of W/B adjustment value
11
Green
12
Offset of W/B adjustment value
13
Blue
(Note 1) : When performed in reference mode selection, offset data outputs the same value as the reference data.
118
Data Contents
(Reference data)
(Offset data)
(Reference data)
(Reference data)
(Reference data)
(Reference data)
(Reference data)
(Reference data)
:
Output data to be related to white balance adjustment of panel
Data Contents
(Reference data)
(Offset data)
(Reference data)
(Offset data)
(Reference data)
(Offset data)
(Reference data)
(Offset data)
(Reference data)
(Offset data)
(Reference data)
(Offset data)
Function
Size Remarks
3 byte AB* ( *: 0 to 3)
3 byte
3 byte (Note 1)
3 byte
3 byte
3 byte
3 byte
3 byte
3 byte
Size Remarks
3 byte PT* ( *: 0 to 3)
3 byte
3 byte (Note 1)
3 byte
3 byte (Note 1)
3 byte
3 byte (Note 1)
3 byte
3 byte (Note 1)
3 byte
3 byte (Note 1)
3 byte
3 byte (Note 1)