Audio Setup Setting - Sharp DV-L88 Operation Manual

Setup

AUDIO SETUP setting

COMPRESSION .......... Use this setting for increasing the average volume of
DIGITAL/MPEG .... Use these settings for specifying the type of digital
Setting the COMPRESSION (Dolby Digital output level)
When Dolby Digital is used to record the audio on a DVD, the average overall
volume level of the audio is relatively lower than that produced by a VIDEO CD/
Audio CD. This is to provide the widest possible dynamic range. To counteract
this, your Player automatically raises the overall average volume level of a disc
recorded using Dolby Digital to a level that is similar to that of a VIDEO CD/
Audio CD.
DVD
Dolby Digital audio
VIDEO CDs
Audio CDs
• OFF ....... Audio level recorded on disc is played back without modification.
• ON ........ Dolby Digital average audio level is increased so it sounds similar
to that of a VIDEO CD/Audio CD.
• Use of the "OFF" setting is recommended when the Player is connected to
audio equipment or, depending on the disc, the sound is abnormal.
• VIRTUAL DOLBY (QSURROUND) is disabled when "COMPRESSION" is set
to "ON".
Dolby Digital audio when playing a DVD.
output when playing a disc recorded using Dolby
Digital/MPEG Audio.
COMPRESSION:
OFF
• Low audio level
COMPRESSION:
ON
• Audio level the same
as Audio CD, etc.