Table of Contents
Advertisement
1
While a disc is stopped, press SETUP to display the Setup screen.
2
Use ' or " to select the "
3
Press ENTER to display the password
specification screen.
4
Use ', ", \ or | to enter a 4-digit password.
• Press ' or " to select the number.
• Press \ or | to move to the place where you enter the number.
• When you have finished entering your 4-digit number,
(password verification display) appears.
• You must input the correct password to make any changes in the parental level.
Be sure to keep a separate record of your password somewhere for later
reference.
• Some DVDs allow the viewer to temporarily change the parental level setting to
view the original scenes. When this prompt appears, input the password to view
the original scenes.
5
Make sure
entered in step 4 using ', ", \ or |.
• When entering numbers,
digits are changed to
• If you enter the wrong number three times in succession, the normal
screen reappears.
If you forget your password, you can erase your current password by
pressing
(F.ADV) four times.
6
After the screen on the right appears, use
\ or | to change the parental level.
• Level 1: for most restrictive viewing →
Level 8: for adult viewing
(The smaller the number, the greater the
level of restriction.)
• When the parental level is set to "OFF",
DVDs can be played back regardless of
the parental level.
PARENTAL SETUP".
is displayed and then re-enter the numbers you
changes to
before performing step 6.
PARENTAL SETUP
PASSWORD:
1
2
3
4
5
6
CODE:
CHINA
digit by digit. Make sure all
PARENTAL SETUP
SELECT LEVEL
1
2
3
4
5
6
CODE:
CHINA
Can be changed to
any number between
1 and 8 or OFF.
Setup
????
7
8
OFF
7
8
OFF
Advertisement
Table of Contents
