Bosch WAW24460EU Instruction Manual And Installation Instructions

Bosch WAW24460EU Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Quick Links

Washing machine
WAW24460EU
en Instruction Manual and Installation Instructions

Advertisement

Table of Contents
loading

Summary of Contents for Bosch WAW24460EU

  • Page 1 Washing machine WAW24460EU en Instruction Manual and Installation Instructions...
  • Page 2 Your new washing machine Display rules : Warning! You have chosen a Bosch washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
  • Page 3: Table Of Contents

    Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use.
  • Page 4: Intended Use

    Intended use Faults and what to do about Intended use them..... . 29 I n t e n d e d u s e Emergency release .
  • Page 5: Safety Instructions

    Safety instructions Reaching into the drum Safety instructions ■ when it is turning can cause injuries to hands. S a f e t o n s u c t i i n s t r Electrical safety Do not reach into the drum when it is turning.
  • Page 6: Safety For Children

    Safety instructions Safety for children Warning Risk of poisoning! Warning Detergents and care products Danger of death! may be poisonous if If children play with the washing consumed. machine, they may get into life- Keep detergents and care threatening situations or injure products out of the reach of themselves.
  • Page 7: Environmental Protection

    Environmental protection Automatic switch off: If the ■ Environmental appliance is not operated for a prolonged period, it may protection automatically switch off before the o n m e n t a l E n v i r c t i p r o t e programme starts and when the Packaging/used appliance...
  • Page 8: Main Points In Brief

    Main points in brief Main points in brief M a i n p o i n t b r i e Connect the mains Open the door. To switch on, press Select a plug. Turn on the the # button. programme, e.g.
  • Page 9: Getting To Know The Appliance

    Getting to know the appliance Getting to know the appliance i n g G e t t k n o w t h e a n c e a p p l i Washing machine Detergent drawer ~ Page 21 Operating/display panel Door with door handle 9S Open the door...
  • Page 10: Control Panel

    Getting to know the appliance Control panel All the buttons are sensitive Note: H Changing the default programme (except for the main switch) and only settings: ~ Page 18 need to be pressed lightly. Temperature (Temp. s), ■ Spin 0, ■...
  • Page 11: Display Panel

    Getting to know the appliance Display panel Further information Programme progress: Prewash Washing Rinse à Spin - 0 - Programme end Programme end during Rinse Stop - P - Pause, e.g. to reload laundry Default programme settings: ( Temperature in °C Washing machine door: Ž...
  • Page 12: Laundry

    Laundry Some examples of soiling levels can Laundry be found on ~ Page 13 – Light: Do not prewash, select the L a u n d r y SpeedPerfect G setting if Prepare the laundry necessary – Normal Caution! – Heavy: Load less laundry, select Damage to the appliance/fabrics a programme with prewash Foreign objects (e.g.
  • Page 13: Detergent

    Detergent Saving energy and detergent Detergent For light and normal soiling, you can g e n t D e t e r save energy (lower washing Correct selection of detergent temperature) and detergent. The care label is crucial for selecting Saving Soiling/note the correct detergent, temperature and...
  • Page 14: Overview Of Programmes

    Overview of programmes Overview of programmes O v e r v i p r o g r a m m e s Programmes on the programme selector Programme/type of laundry/information Settings Programme name Max. load Brief explanation of the programme and for which fabrics it is Temperature that can be selected suitable.
  • Page 15 Overview of programmes Programme/type of laundry/information Settings Max. 4 kg Mixed load of cottons and synthetic fabrics Ž - 40 °C $ - 1600** rpm EcoPerfect F, SpeedPerfect G, Easy-iron p, Water Plus Z Max. 2 kg Delicates / Silk For delicate, washable fabrics, e.g.
  • Page 16 Overview of programmes Programme/type of laundry/information Settings *** Dark Wash Max. 3.5 kg Dark-coloured cottons and dark-coloured easy-care fabrics; Ž - 40 °C turn items inside-out before washing. $ - 1200 rpm EcoPerfect F, SpeedPerfect G, Easy-iron p, Water Plus Z *** Allergy Plus Max.
  • Page 17: Starching

    Overview of programmes Programme/type of laundry/information Settings *** Sportswear Max. 2 kg Sportswear and leisurewear made from microfibre fabrics; Ž - 40 °C Notes $ - 800 rpm Laundry must not be treated with fabric softener. ■ EcoPerfect F, SpeedPerfect G, Before washing, clean the detergent drawer thoroughly (all ■...
  • Page 18: Soaking

    Programme default settings Soaking Temperature (Temp. s) Switch on the appliance. Select the Cottons 30 °C Depending on what stage the programme. programme is in, you can change the Pour soaking agent/detergent into set temperature before and during the compartment II in accordance with programme.
  • Page 19: Additional Programme Settings19

    Additional programme settings Press the Finished in button Additional programme repeatedly until the required number of hours is displayed. settings The setting values are Note: i o n a l A d d i t p r o g r a m m e i n g s s e t t...
  • Page 20: Operating The Appliance

    Operating the appliance The maximum load and the duration ■ Operating the of the programme (alternately) appliance In appliances with a drum light: The drum is lit after switching on the i n g O p e r a t t h e a n c e a p p l i...
  • Page 21: Measure And Add Detergent And Care Products

    Operating the appliance Measure and add detergent Pour the detergent and care products into the appropriate compartments: and care products Caution! Damage to the appliance Cleaning agents and agents for pre- treating laundry (e.g. stain removers, prewash sprays, etc.) may cause damage if they come into contact with the surfaces of the washing machine.
  • Page 22: Change The Programme Default Settings

    Operating the appliance Start the programme For models without a measuring aid, pour the liquid detergent into the Press the A button. The indicator lamp appropriate dispenser and place it in lights up and the programme starts. the drum. The display panel shows the "Ready in" Change the programme time while the programme is running or the programme length and the...
  • Page 23: Adding Laundry

    Operating the appliance The childproof lock remains Cancel the programme Note: active, even once the washing machine has been switched off. Before selecting For programmes at high temperatures: the next programme, deactivate the Press the A button. childproof lock. To cool down laundry: Select Rinse. Press the A button.
  • Page 24: Appliance Settings

    Appliance settings Wipe the rubber seal dry. Activating the setting mode ■ Press the # button. The appliance is switched on and the Cottons programme is shown at position 1. Press the Temperature button and, at the same time, turn the programme selector clockwise to Leave the door and detergent ■...
  • Page 25: Exiting Setting Mode

    Sensors Exiting setting mode Cleaning and To exit and save the settings, press the maintenance # button. C l e a n i a n d e n a n c e m a i n t The appliance is switched off. The Warning selected settings will take effect the next Danger of death!
  • Page 26: Machine Housing/Control Panel

    Cleaning and maintenance Machine housing/control Fit the insert and lock it in place (push the cylinder onto the guide panel pin). Push in the detergent drawer. Wipe the housing and the control ■ panel with a soft, damp cloth. Leave the detergent drawer open Note: Remove the detergent residue ■...
  • Page 27: The Drain Hose At The Siphon Is Blocked

    Cleaning and maintenance Carefully unscrew the pump cover; The drain hose at the siphon residual water may leak out. is blocked Clean the interior, pump-cover thread and pump housing. The Switch off the appliance. Pull out the impeller in the drain pump must be mains plug.
  • Page 28: Filter In The Water Supply Blocked

    Cleaning and maintenance Filter in the water supply blocked First, reduce the water pressure in the supply hose: Turn off the tap. Select any programme (except Rinse/Spin/Empty). Press the A button. Allow the programme to run for approximately 40 seconds. Press the # button.
  • Page 29: Faults And What To Do About Them

    Faults and what to do about them. Faults and what to do about them. F a u l t a n d w h a t a b o u t t h e m . Emergency release E.g. in the event of a power cut The programme continues when the power supply is restored.
  • Page 30: Information On The Display Panel

    Faults and what to do about them. Information on the display panel Display Cause/Remedy - P - and ¼ The door is unlocked. It is possible to add laundry. - P - The temperature is too high. Wait until the temperature drops. ■...
  • Page 31: Faults And What To Do About Them

    Faults and what to do about them. Faults and what to do about them. Faults Cause/Remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ machine. Tighten the screw fitting on the supply hose. ■ The machine is not filling Have you pressed the A button? ■...
  • Page 32 Faults and what to do about them. Faults Cause/Remedy Odours in the washing Run the Cottons 90 °C programme without laundry. machine. Add washing powder or a detergent containing bleach. Note: . To prevent foaming, only use half of the amount of detergent recommended by the detergent manufacturer.
  • Page 33: After-Sales Service

    After-sales service After-sales service r - s a l A f t e s e r v i If you cannot rectify a fault yourself, contact customer services. ~ Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers.
  • Page 34: Consumption Rates

    Consumption rates Consumption rates C o n s u m p t i r a t e s Energy and water consumption, programme duration and residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption* consumption* duration* Cottons 20 °C...
  • Page 35: Efficiency Test Programmes For Cotton Fabrics

    Technical data Efficiency test programmes for cotton fabrics The following programmes (standard programmes, indicated by ü) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. Standard programmes for Cottons in accordance with the (EU) directive no. 1015/2010 Programme + temperature + button Load Approximate programme...
  • Page 36: Positioning And Connecting

    Positioning and connecting ( Mains cable Positioning and 0 Bag: connecting Installation and operating ■ instructions i o n i n g P o s i t a n d c o n n e c t i Customer services location ■...
  • Page 37: Safety Instructions

    Positioning and connecting Safety instructions Installation surface The washing machine be stable Warning Note: so that it does not move around. Risk of injury! The installation surface must be firm The washing machine is very heavy. ■ ■ and level. Be careful when lifting/transporting Soft floors/floor coverings are not the washing machine.
  • Page 38: Installing The Appliance In A Kitchenette

    Positioning and connecting Installing the appliance in a Keep the screws and sleeves in Note: a safe place. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate.
  • Page 39: Hose And Cable Lengths

    Positioning and connecting Hose and cable lengths Do not immerse the Aqua-Stop safety valve in water (it contains an electric valve). Left-hand connection ■ Notes Only operate the washing machine ■ using cold mains water. Do not connect the machine to the ■...
  • Page 40: Water Outlet

    Positioning and connecting Water outlet Connection Connect the water supply hose to the Warning tap (26.4 mm = ¾") and to the Risk of scalding! appliance (not necessary for Aqua-Stop When you are washing at high models as this is permanently installed): temperatures, there is a risk of scalding Model: Standard if you come into contact with hot water...
  • Page 41: Levelling

    Positioning and connecting Levelling Connection Drainage into a washbasin Align the appliance using a spirit level. ■ Incorrect alignment may result in loud noises, vibrations and machine "movement". Loosen the lock nuts using a WAF17 spanner, by turning it in a clockwise direction.
  • Page 42: Electrical Connection

    Positioning and connecting Electrical connection Before washing for the first time Warning The washing machine was thoroughly Danger of death! tested before leaving the factory. In There is a risk of electric shock if you order to remove any water which may touch live components.
  • Page 43: Transportation

    Positioning and connecting Transportation Before switching on the appliance again: E.g. when moving house Notes Preparatory work: The transport braces must be ■ Turn off the tap. removed. Reduce the water pressure in the Pour approx. 1 litre of water into ■...
  • Page 44 A call set-up fee of up 6 pence may apply.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. Robert Bosch, Hausgeräte GmbH Carl-Wery-Straße 34 81739 München DEUTSCHLAND...

Table of Contents