Related Manuals for Bosch WAW28570EE
Summary of Contents for Bosch WAW28570EE
- Page 1 Washing machine WAW28570EE, WAW2857XEE en Instruction Manual and Installation Instructions...
- Page 2 Your new washing machine Display rules : Warning! You have chosen a Bosch washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. - Page 4 Cleaning and maintenance . . . 29 Aqua-Stop warranty ..47 Machine housing/control panel ..30 Drum ......30 Descaling.
-
Page 5: Intended Use
Intended use Intended use For private domestic use only. ■ I n t e n d e d u s e The washing machine is suitable for ■ washing machine-washable fabrics and hand-washable wool in water containing detergent. To be operated with cold mains ■... -
Page 6: Safety Instructions
Safety instructions Reaching into the drum Safety instructions ■ when it is turning can cause injuries to hands. Electrical safety Do not reach into the drum S a f e t y i n s t r u c t i o n s when it is turning. -
Page 7: Safety For Children
Safety instructions Safety for children Warning Risk of poisoning! Warning Detergents and care products Danger of death! may be poisonous if If children play with the washing consumed. machine, they may get into life- Keep detergents and care threatening situations or injure products out of the reach of themselves. -
Page 8: Environmental Protection
Environmental protection Information on energy and water ■ Environmental consumption: ~ Page 12 The displays provide information protection about the relative level of energy and water consumption in the selected Packaging/used appliance programmes. E n v i r o n m e n t a l p r o t e c t i o n The more indicator lights light up, Dispose of packaging in an the higher the programme's... -
Page 9: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Open the door. To switch on, press Select a plug. Turn on the the # button. -
Page 10: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer ~ Page 24 Operating/display panel Door with door handle 9S Open the door... -
Page 11: Control Panel
Getting to know the appliance Control panel All the buttons are sensitive Note: @ A button for: (except for the main switch) and only Starting a programme ■ need to be pressed lightly. Interrupting a programme, e.g. ■ to add items of laundry ~ Page 26 ( Main switch for switching the washing machine... -
Page 12: Display Panel
Getting to know the appliance Display panel Further information Anti-Stain System (Manchas / ° | º · Nódoas) ~ Page 23 Programme progress: Prewash Washing Rinse à Spin - 0 - Programme end Default programme settings: ( Temperature in °C Programme end during Rinse Ž... -
Page 13: Laundry
Laundry Soiling ■ Laundry Wash laundry with the same level of soiling together. P repare the laundry Some examples of soiling levels can L a u n d r y be found on ~ Page 14 Caution! – Light: Do not prewash, select the Damage to the appliance/fabrics TurboPerfect setting if necessary –... -
Page 14: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 15: Overview Of Programmes
Overview of programmes Overview of programmes Programmes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings Programme name Max. load Brief explanation of the programme and for which fabrics it is Temperature that can be selected suitable. - Page 16 Overview of programmes Programme/type of laundry/information Settings Max. 4 kg Mixed load of cottons and synthetic fabrics Ž - 40 °C $, 0 - 1600** rpm EcoPerfect, TurboPerfect, Prewash (Prelavado / Pré-lavagem), Rinse Plus (Aclarado adic. / Enxag. adicional), Easy-Iron (Menos plancha / Menos ferro) Delicates / Silk (Delicado / Seda) Max.
- Page 17 Overview of programmes Programme/type of laundry/information Settings Rinse / Spin (' / 0) Extra rinse/spin with speed that can be selected Note: . The Rinse Plus (Aclarado adic. / Enxag. adicional) button $, 0 - 1600** rpm is set by default for this programme. If you require a spin cycle Easy-Iron only, press the button to deactivate the function.
- Page 18 Overview of programmes Programme/type of laundry/information Settings *** Allergy Plus (Antialergias) Max. 7 kg/5* kg Hard-wearing fabrics made of cotton or linen Ž - 60 °C Note: . Particularly suited to washing items that need to be $, 0 - 1600** rpm hygienically clean and especially kind to sensitive skin thanks to EcoPerfect, TurboPerfect, the longer wash cycle at a defined temperature, higher water level...
- Page 19 Overview of programmes Programme/type of laundry/information Settings *** Sports / Fitness (Sport) Max. 2 kg Sportswear and leisurewear made from microfibre fabrics Ž - 40 °C Notes $, 0 - 800 rpm Laundry must not be treated with fabric softener. ■...
- Page 20 Overview of programmes Programme/type of laundry/information Settings ***Lingerie Max. 1 kg For delicate, washable underwear, e.g. made of velvet, lace, Ž - 40 °C Lycra, silk or satin. $, 0 - 600 rpm EcoPerfect, TurboPerfect, Rinse Plus (Aclarado adic. / Enxag. adicional), Easy-Iron (Menos plancha / Menos ferro) *** Duvet...
-
Page 21: Starching
Programme default settings Starching Programme default settings Laundry must not be treated with Note: fabric softener. The default programme settings are Starching is possible in all wash P r o g r a m m e d e f a u l t s e t t i n g s displayed in the display panel after programmes if liquid starch is used. -
Page 22: Finished In
Additional programme settings Finished in Additional programme (Terminado en/em) settings Before starting the programme, you can preselect the programme end An overview of all additional settings, A d d i t i o n a l p r o g r a m m e s e t t i n g s ("Ready in"... -
Page 23: Easy-Iron
Operating the appliance Easy-Iron Operating the (Menos plancha / Menos ferro) appliance Reduces creasing thanks to a special Preparing the washing spin sequence followed by fluffing and O p e r a t i n g t h e a p p l i a n c e reduced spin speed. -
Page 24: Placing Laundry Into The Drum
Operating the appliance The indicator light on the programme Unfold presorted laundry items and selector lights up and the default place them in the drum. programme settings for the selected Make sure that no items of laundry programme appear in the display panel: are trapped between the door and the rubber seal, and close the door. -
Page 25: Change The Programme Default Settings
Operating the appliance Filling Measuring aid* for liquid detergent *depending on the model Warning Eye/skin irritation! Position the measuring aid for dosing Detergents and care products may the correct amount of liquid detergent: spray out if the detergent drawer is Pull out the detergent drawer. -
Page 26: Select Additional Programme
Operating the appliance Select additional programme Childlock settings (E 3 seg.) By selecting additional settings, you can You can lock the washing machine to better adapt the washing process to prevent the functions you have set from your items of laundry. being changed inadvertently. -
Page 27: Changing The Programme
Operating the appliance Programme end Notes Do not leave the door open for too ■ - 0 - and ÿ appear in the display panel. long when adding laundry as water The A button indicator lamp is off. from the laundry may leak out. For safety reasons, the door remains ■... -
Page 28: Appliance Settings
Appliance settings Changing the signal volume Appliance settings Use the Finished in + or - button to You can change the following settings: change the following settings at the A p p l i a n c e s e t t i n g s corresponding programme selector The volume of the buttons and the ■... -
Page 29: Sensors
Sensors Sensors Cleaning and maintenance A utomatic load sensing S e n s o r s Warning Depending on the type of fabric and C l e a n i n g a n d m a i n t e n a n c e Danger of death! load, the automatic load sensing There is a risk of electric shock if you... -
Page 30: Machine Housing/Control Panel
Cleaning and maintenance Machine housing/control Fit the insert and lock it in place (push the cylinder onto the guide panel pin). Push in the detergent drawer. Wipe the housing and the control ■ panel with a soft, damp cloth. Leave the detergent drawer open Note: Remove the detergent residue ■... -
Page 31: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Carefully unscrew the pump cover; Re-attach the drain hose and secure residual water may leak out. the connection point using the hose Clean the interior, pump-cover thread clamp. and pump housing. The impeller in the drain pump must be able to Filter in the water supply rotate. -
Page 32: Faults And What To Do About Them
Faults and what to do about them. Caution! Faults and what to do Water damage about them. Any escaping water may cause water damage. Emergency release Do not open the door if water can be F a u l t s a n d w h a t t o d o a b o u t t h e m . seen through the glass. -
Page 33: Information On The Display Panel
Faults and what to do about them. Information on the display panel Display Cause/Remedy - P - and ÿ The door is unlocked. It is possible to add laundry. - P - The temperature is too high. Wait until the temperature drops. ■... -
Page 34: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. Faults Cause/Remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ machine. Tighten the screw fitting on the supply hose. ■ The machine is not filling Have you pressed the A button? ■... - Page 35 Faults and what to do about them. Faults Cause/Remedy Odours in the washing Run the Drum clean or Cottons 90 °C programme without laundry. machine. Add washing powder or a detergent containing bleach. Note: . To prevent foaming, only use half the amount of detergent recommended by the detergent manufacturer.
-
Page 36: After-Sales Service
After-sales service After-sales service If you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e contact customer services. ~ Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers. -
Page 37: Consumption Rates
Consumption rates Consumption rates Energy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption* consumption*... -
Page 38: Efficiency Test Programmes For Cotton Fabrics
Technical data Efficiency test programmes for cotton fabrics The following programmes (standard programmes, indicated by ü) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. Standard programmes for Cottons in accordance with the (EU) directive no. 1015/2010 Programme + temperature + button Load Approximate programme... -
Page 39: Safety Instructions
Positioning and connecting In addition, a hose clamp (24 - 40 mm diameter, available from specialist dealers) is required to connect the water drain hose to a siphon. Useful tools Spirit level for aligning ■ Spanner with: ■ – WAF13 for loosening the transport braces, and –... -
Page 40: Installation Surface
Positioning and connecting Installing the appliance in a Notes In addition to the safety information kitchenette ■ listed here, the local water and electricity supplier may have special Warning requirements. Danger of death! If in doubt, have the appliance ■ There is a risk of electric shock if you connected by a specialist. -
Page 41: Hose And Cable Lengths
Positioning and connecting Take the hoses out of the holders. Right-hand connection ■ Unscrew and remove all four transport brace screws. Remove the sleeves. To do this, remove the mains cable from the holders. The following are available from Tip: specialist dealers/customer services: Extension for Aqua-Stop and cold ■... -
Page 42: Water Inlet
Positioning and connecting Water inlet When the tap is open, the water flow rate is at least 8 l/min. Warning If the water pressure is higher than this, Danger of death! a pressure-reducing valve must be There is a risk of electric shock if you installed. -
Page 43: Water Outlet
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin). -
Page 44: Levelling
Positioning and connecting Levelling Observe the following information and ensure that: Align the appliance using a spirit level. Notes Incorrect alignment may result in loud The mains voltage and voltage ■ noises, vibrations and machine indicated on the washing machine "movement". -
Page 45: Before Washing For The First Time
Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory. In order to remove any water which may be left over from the test, run the first washing cycle without any laundry. Notes The washing machine must be ■... -
Page 46: Transportation
Positioning and connecting Transportation Before switching on the appliance again: E.g. when moving house Notes Preparatory work: The transport braces must be ■ Turn off the tap. removed. Reduce the water pressure in the Pour approx. 1 litre of water into ■... - Page 47 Aqua-Stop warranty Aqua-Stop warranty Only for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a...
- Page 48 0344 892 8979 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. Robert Bosch Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY *9001077844*...