Panasonic AJ-RC905EN Service Manual page 19

8. Click the "File Open" button.
9. Select the version-up data file (xxxx.mot format file) and then click the "Open" button. (See Figure 4)
10. On the main window, click the "Start writing" button and data transfer will be started from the PC to the
AJ-RC905. (It takes about two-minutes.)
11. When a message "Completes Writing of file: xxxx.mot" appears, the software version upgrade is completed.
12. Turn off the power of AJ-RC905 and then set SW3 to the original position.
Note :
The FLASH1 Version-up Tool is a product from Hokuto Denshi Co., LTD.
Refer to Panasonic Engineering Web Site for the purchasing method and etc.
Fig. 4 Open File Dialog
Fig. 5 Log Information
INF-3