Table of Contents
Advertisement
Cap
NOTE
•
Take care not to damage the drive unit cover when removing the drive unit fixing screws.
•
Use a Phillips screwdriver with a shaft diameter of 4mm or less to remove the drive unit fixing screws.
•
Never insert the removed screws into the screw holes in which the drive unit was fixed.
•
When the lens is tilted, the zoom ring may turn and the zoom position may change. To retain the zoom position
when the lens is tilted, mount a cinema operation accessory with adjustable torque and with a pitch of 0.5.
•
If the drive unit is removed, the iris ring may turn and the iris position may change. To retain the iris position,
mount a cinema operation accessory with adjustable torque and with a pitch of 0.4 on the iris ring. For details on
the operation accessory with a pitch of 0.4, contact Canon Inc. or Canon distributers & sales representatives.
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT
6
Cap the contact on the lens body.
If power is supplied from the camera when the PL
mount lens is used, remove the 12-pin cable and then
cap the connector.
7
Place the detached drive unit in the supplied storage
bag.
E21
Advertisement
Table of Contents
