To Eject A Dvd Disk Manually; To Play Dvd Movies - HP OmniBook 7150 User Manual

To eject a DVD disk manually

If you lose power to the OmniBook, or if you've removed the DVD module from the
OmniBook, you can manually open the DVD drive to remove a DVD disk.
Carefully insert a straightened paper clip into the emergency eject hole located
above the eject button, as shown below.

To play DVD movies

Windows NT does not support the player software.
When you purchase a DVD plug-in module, you will also receive a CD containing
DVD / MPEG player software. Insert the CD and refer to the readme file for software
installation instructions.
For the OmniBook 7150 only, the ATI DVD player is included on the hard disk drive,
but is not installed. Use these steps to install the player software.
Click Start, Programs, ATI DVD Player, Setup.
Using OmniBook Plug-In Modules
1-15