To Use The Fn Hot Keys; To Use The Windows Keys; To Use The Embedded Keypad - HP OmniBook 7100 User Manual

To use the Fn hot keys

The combination of the Fn key plus another key creates a hot key—a
shortcut key sequence—for various system controls. Press and hold Fn
while pressing the desired key.
Hot key Does this
Fn + F1
Decreases the display's brightness.
Fn + F2 Increases the display's brightness.
Fn + F5
Switches among the built-in display, an external display, and
simultaneous displays.
Fn + F6
For use with two batteries: The battery indicator in the status panel
(hold) briefly displays the individual battery status for each battery you have
installed in the OmniBook.
Fn + F8
Toggles the embedded keypad on and off. Does not affect an
external keyboard. If Num Lock is on, then the numeric functions are
active; otherwise, cursor control is active.
Fn + F12
Enters
Fn + R
Enters
Fn + S Enters
Fn + F Toggles between front and rear infrared ports.
Fn +
Toggles Scroll Lock on and off.
NmLk

To use the Windows keys

There are two Windows keys on the keyboard.
The one next to the Fn key brings up the Windows Start menu.
The one at the top center of the keyboard brings up the shortcut menu for
the current application. This is the same menu that appears when you click
the right mouse button while pointing at the application.

To use the embedded keypad

When the embedded keypad on the OmniBook's built-in keyboard is active, two
options are possible.
Num Lock on. Keys change to the numeric or arithmetic designations printed in light
gray on the keyboard.
Num Lock off. Keys change to cursor control keys.
1. Press the NmLk key to turn Num Lock on or off.
2. Press Fn+F8 to turn on the embedded keypad.
Hibernate mode.
Suspend mode.
Standby mode.
17