Bluetooth Module - HP Mini 1000 Maintenance And Service Manual

Bluetooth module

NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is included in the Cable Kit, spare part number 507708-001.
Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the device.
3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4. Remove the battery (see
5. Remove the following components:
a. Keyboard (see
b. Hard drive or solid-state drive (see
c. Top cover (see
Remove the Bluetooth module:
1. Detach the Bluetooth module (1) from the system board.
NOTE:
2. Disconnect the Bluetooth module cable (2).
Reverse this procedure to install the Bluetooth module.
46 Chapter 4 Removal and replacement procedures
Battery on page
Keyboard on page
Top cover on page
The Bluetooth module is attached to the system board by double-sided tape.
32).
35)
Mass storage devices on page
40)
Spare part number
507706-001
37)