Smart Card Reader - HP EliteBook 2740p Maintenance And Service Manual

c.
d.
Remove the modem module:
1. Turn the computer right-side up, with the front toward you.
2. Disconnect the modem module (1) from the system board by lifting it straight up.
3. Disconnect the modem module cable (2) from the modem module, and then remove the module
from the computer.
Reverse this procedure to install the modem module.

Smart card reader

Description
Smart card reader (includes cable)
Before removing the smart card reader, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive cover (see
68 Chapter 4 Removal and replacement procedures
Display assembly (see
System board shield (see
Battery on page
Display assembly on page
System board shield on page
39).
Hard drive on page
62)
66)
Spare part number
597839-001
41)
ENWW