d. Remove the hard drive.
Ä
CAUTION: The hard drive cover should be removed only if it is
damaged and must be replaced. Unnecessarily removing the cover can
result in loss of information and damage to the cover and to the
hard drive.
e. Remove the 4 PM2.5×3.5 screws 1 that secure the hard
f. Remove the hard drive shield 2 and connector 3 from
g. Separate the hard drive from the hard drive cover 4.
Removing the Hard Drive from the Hard Drive Cover
✎
The hard drive cover, shield, and connector are included with
the hard drive and also in the Miscellaneous Plastics Kits, spare
part number 350130-001 for HP Pavilion zt3000 models, spare
part number 338133-001 for HP Compaq nx7000 models, and
spare part number 337009-001 for Compaq Presario X1000
models.
Reverse the above procedure to install the hard drive.
Maintenance and Service Guide
drive to the hard drive cover and shield.
the hard drive.
Removal and Replacement Procedures
5–7