Tektronix TBS1032B User Manual page 118

Reference
94
Table 3: Miscellaneous measurements
Measurement
Rising Edge Count
Falling Edge Count
Positive Pulse Count
Negative Pulse Count
Area
Cycle Area
Cursor Mean
Cursor RMS
TBS1000B and TBS1000B-EDU Series Oscilloscopes User Manual
Description
The number of positive transitions from the low
reference value to the high reference value in
the waveform or gated region.
The number of negative transitions from the high
reference value to the low reference value in the
waveform or gated region.
The number of positive pulses that rise above
the mid reference crossing in the waveform or
gated region.
The number of negative pulses that fall below
the mid reference crossing in the waveform or
gated region.
Area measurement is a voltage over time
measurement. It returns the area over the entire
waveform or gated region in volt-seconds. Area
measured above ground is positive; area
measured below ground is negative.
A voltage over time measurement. The
measurement is the area over the first cycle in
the waveform or the first cycle in the gated
region expressed in volt-seconds. The area
above the common reference point is positive,
and the area below the common reference point
is negative.
The arithmetic mean of the waveform data from
the selected starting to the ending point
Calculates a true RMS measurement of the
waveform data from the selected starting to the
ending point