Clean The Dispenser - BRIO CLPOU520UVF4 Instruction Manual

Clean the Dispenser

CAUTION: Before cleaning, make sure the power switch is in the O (off) position and unplug the
water dispenser .
IMPORTANT: This dispenser contains UV technology that will help keep your dispenser clean .
However, if you do need to clean your dispenser for any reason, follow these steps:
1 . Remove remaining water from reservoirs in
the dispenser by dispensing from the hot and
cold taps into a pitcher or bucket .
2 . Remove the top cover (1), cold tank cover (2),
and separator (3) .
3 . Rinse off the separator (3) in the sink and
wipe clean with a soft cloth .
4 . Create a cleaning solution of 0 .3 gallons
vinegar and 0 .3 gallons hot tap water . Allow
the cleaning solution to fill the reservoir and
sit for at least 10 minutes .
5 . Place a large bucket beneath the drain outlet
at the back of the dispenser .
6 . Remove the drain cover and drain the water .
7 . Reinstall the drain cover, separator, cold tank
cover, and top cover after draining . Ensure
all water supply connections are connected
securely .
8 . Plug the dispenser back into the outlet and
turn on .
1
2
3
11