Electromagnetic fields (EMF)
General
The display
Start-up sequence
Charging
- This Philips appliance complies with all
applicable standards and regulations regarding
exposure to electromagnetic fields.
- This shaver is waterproof. It is suitable for use in
the bath or shower and for cleaning under the
tap. For safety reasons, the shaver can
therefore only be used without cord.
- The supply unit is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Note: Remove any sticker or protective foil from
the display before using the product.
When you press the on/off button for the very first
time, all display indications light up in sequence.
The shaver now contains enough energy for one
shave.
Quick charge: When the battery is empty and you
connect the shaver to the wall socket, the lights of
the battery charge indicator light up red one after
the other repeatedly. When the battery contains
enough energy for one shave, the bottom light of
the battery charge indicator starts flashing red
slowly.
9
English