Disassembly Method - JVC VS-DT2000 Service Manual

Disassembly method

<Main body section>
Removing the top lens
From the top side of the main body, remove the
four screws A attaching the top lens.
Removing the bottom panel
1. From the rear side of the main body, remove the
three screws B attaching the bottom panel.
2. From the bottom side of the main body, remove the
two screws C attaching the bottom panel.
3. Remove the bottom panel in an upward direction.
Removing the top panel
Remove the top lens.
Remove the bottom panel.
1. Slide the top panel toward the rear (direction of the
arrow), disengage it from the engagement sections
a of the front panel assembly and engagement
sections b of the bottom chassis.
2. Remove the top panel in an upward direction.
(See Fig. 1.)
(See Figs. 2 and 3.)
(See Fig. 4.)
A
Fig.1
Bottom panel
Fig.2
C
Fig.3
b
Front panel assembly
Fig.4
VS-DT2000
Top lens
A
Top panel
B
Bottom panel
Top panel
b
a
1-7