Getting Ready - Kenwood K23MFW15 Instruction Manual

getting ready

This microwave is designed for home use. It should not be used for commercial catering.
1. After unpacking your microwave, check that it has not been damaged whilst in the box. Make
sure there are no dents, and the door closes properly. A damaged microwave could allow
microwave energy to escape. Make sure that you have taken out all the packaging from the
inside of the microwave. Please dispose of the plastic wrappings / bags safely and keep out of
the reach of babies and young children.
2. Choose a flat, stable work surface for
your microwave away from heat sources
such as radiators or fires and away from
cold areas. The surface should be at least
85cm above the floor. Place the back of
the microwave against a wall and allow
a 20 cm space on both sides of the unit
and 30 cm above so that warm air can
escape from the vents during cooking. This
microwave is not designed to be built in. Do
not block any intake or outlet openings as
this can damage the unit.
3. Plug your microwave into a standard
household electrical socket (230-240V~,
13 amp rated). Avoid using a socket that
also has an adapter and other equipment
plugged in. Do not use a multi-adapter.
4. To protect your work surface, we
recommend that you fix some non-slip
cushion buttons (not included) to the
underside of the microwave.
Do not remove the unit's feet.
10
30cm
20cm
Underside View
20cm