Sealey CX410SS Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions
and maintained properly, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Instruction
manual
1. SAFETY
1.1. GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this trolley.
‰
Always load evenly with the centre of gravity of the load as near centre of the trolley as possible.
9
DO NOT overload the trolley - maximum weight per level is 30kg.
8
Use the trolley in a suitable work area.
8
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the trolley clean and tidy in accordance with good workshop practice.
9
DO NOT use the trolley for any purpose other than that for which it is designed.
8
DO NOT stand on the trolley, use it as a ladder or allow others to ride on the trolley.
8
Use the wheel locks to prevent the trolley from inadvertently moving.
9
DO NOT leave unattended, especially when loaded, unless the wheels are locked, chocked or the trolley otherwise secured.
8
DO NOT use trolley on uneven ground and do not run over curbs or steps - use a ramp.
8
DO NOT use trolley if any part is significantly damaged, paying particular attention to the wheels.
8
Keep children and unauthorised persons away from the work area.
9
2. INTRODUCTION
Grade 304 stainless steel workshop trolley with three 30kg capacity shelves. Shelves have 30mm walls around the sides and back with an
opening at the front - ideal for quickly getting to tools or fixings without obstruction. Fitted with a side handle and four castor wheels for ease of
mobility around the workplace. Supplied flat packed.
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CX410SS
Overall Size (W x D x H): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 810 x 458 x 862mm
Shelf Size (W x D x H): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 715 x 450 x 30mm
Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30kg/level*
*Evenly distributed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
© Jack Sealey Limited
INSTRUCTIONS FOR:
WORKSHOP TROLLEY STAINLESS
STEEL 3-LEVEL
CX410SS
MODEL NO:
Original Language Version
CX410SS Issue 1 - 11/05/16