Yamaha Revolabs FLX2 System Manual page 48

Phone Settings
1. Browse to the Phone Settings menu: Menu 
Setup  Advanced Setup  Phone Settings.
a. You can change the dialing method by
selecting the entry, and then pressing the
'Select' key. The factory preset is TONE.
b. You can set the telephone number that is
shown in the Dialer of the FLX2 System
using the Phone Number setting. Select
this entry, type in the number, and press
'Enter' to capture the telephone number.
c. Selecting Hook Flash Time you can change
the time for a hook flash to be sent to your
network. Factory default is 75 ms, you can
increase this by selecting another entry in
the menu.
d. Disconnect ON/OFF allows you to ignore
signals sent by the far side indicating a
hang-up. If you are seeing 'Line in Use'
messages on your phone even though the
line is not in use, this setting has to be set
to OFF.
Language/Region
1. Browse to the Network Settings menu: Menu  Setup
 Advanced Setup  Language/Region.
a. The Language submenu allows selecting the
dialer language from one of the six supported
languages: The options are English, Español
(Spanish), Français (French), Deutsch
(German), Italiano (Italian), and Português
(Portuguese). Highlight the language of your
choice, and press either "Enter" or "Select" on the
Dialer to select it. Once a language is select, the
system will use that language for all screen
contents.
b. The Country/Region submenu allows selecting
the local Country or region. Please ensure that
this selection is always set to your local country
or region. Changing this setting might lead to
loss of connectivity to the microphones and
48