EN62841-3-9:2015 + A11:2017. These products also comply with Blade speed, max. 4600/4500 4600/4500 Directive 2014/30/EU and 2011/65/EC. left 48° 48° For more information, please contact DEWALT at the following address or Mitre positions, max. right 48° 48° refer to the back of the manual. Bevel position, max. left 48°...
(grounded) power tools. Unmodified plugs and matching outlets a responsible supervisor) who are not under the influence of fatigue, alcohol, medication or drugs. will reduce risk of electric shock. b ) Avoid body contact with earthed or grounded surfaces such Misapplications, misuse or “fooling around” may cause lethal injuries and as pipes, radiators, ranges and refrigerators.
Page 24
c ) Disconnect the plug from the power source and/or the f ) Do not reach behind the fence with either hand closer than battery pack from the power tool before making any 100 mm from either side of the saw blade, to remove wood adjustments, changing accessories, or storing power tools.
s ) Hold the handle firmly when making an incomplete cut or when releasing the switch before the saw head is completely Safety boots protect the feet against falling objects and the in the down position. The braking action of the saw may cause entry of protruding nails the saw head to be suddenly pulled downward, causing a risk of injury.
Mains plug replacement (UK & Ireland only) If a new mains plug needs to be fitted: Do not use the tool in damp or wet conditions • No connection is to be made to the earth terminal. • Connect the brown lead to the live terminal in the plug. •...
After use • Check the technical data of the new blade: Use 216 mm saw blades with 30 mm arbor holes to obtain the desired cutting capacities. • Disconnect the power cable from the power supply. • Replace the kerf plate when worn. If the kerf plate becomes worn or •...
Page 28
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)