Table of Contents
Advertisement
Troubleshooting
If You Suspect Something Wrong
Check and take steps as described below.
If the described suggestions do not solve the problem, it is
recommended to take the unit to your nearest authorized
Panasonic Servicenter. The product should be serviced only
by qualified personnel. Please refer the checking and the
repair to professionals. Panasonic shall not be liable for any
accidents arising out of neglect of checking the unit or your
own repair after your checking.
Problem
The Bluetooth function of the mobile phone is disabled. (Some mobile phones are
turned off in a predetermined time in the power-saving mode or the like.)
Refer to the operating instructions for the mobile phone and change the setting.
The paired mobile
The mobile phone is selected to the setting so that automatic reconnection is not per-
phone cannot be
mitted.
Refer to the operating instructions for the mobile phone and change the setting.
automatically
reconnected.
Bluetooth connection is lost by key operation.
Establish Bluetooth connection again by key operation.
If Bluetooth connection is not successfully established, delete "CY-BT100" from the
mobile phone pairing list, and try pairing again.
26
Warning
¡ Do not use the unit in an irregular condition, for exam-
ple, without sound, or with smoke or a foul smell, which
can cause ignition or electric shock. In case that such
conditions occur, immediately stop using this unit and
consult your dealer.
¡ Never try to repair the unit by yourself because it is dan-
gerous to do so.
Possible cause
a
Possible solution
Problem
There is the other wireless equipment near the unit.
Switch off the other wireless equipment or keep it away from these bluetooth
units.
The mobile phone (or main unit) is touched or covered by metal objects. Or the mobile
phone is hidden or far from the main unit.
Move the mobile phone (or main unit) away from metal objects or from the hiding
Failure to pair a
position.
mobile phone
Consult your dealer to move the main unit.
The mobile phone is not HFP (Hands Free Profile)-ready even it is Bluetooth-ready.
Use an HFP-ready and Bluetooth-ready mobile phone in consideration of each
version.
The Link key of this unit is different from the Link key of the mobile phone.
Delete "CY-BT100" from the mobile phone pairing list, and try pairing again.
The mobile phone
Some mobile phone models fail to connect automatically via Bluetooth.
cannot be
Once turn off the power of the mobile phone and turn on the power again.
If Bluetooth connection is not successfully established, delete "CY-BT100" from the
automatically
mobile phone pairing list, and try pairing again.
connected.
Possible cause
a
Possible solution
27
Advertisement
Table of Contents
