Image Backup And Recovery Procedures; Windows 10 Procedures - Fujitsu EM7455D2 Operating Manual

Creating a recovery drive
A recovery drive can help you troubleshoot and fix problems with your PC, even if it
won't start. To create one, all you need is a USB flash drive. Windows will inform you
of the size the USB flash drive needed to hold the required data.
1. From the taskbar, search for Create a recovery drive and then select it. You may be
asked to enter an administrator password or confirm your selection.
2. When the tool opens, make sure Backup system files to the recovery drive
is selected and then select Next.
3. Connect a USB drive to your PC, select it, and then select Next - Create. A large number of
files need to be copied to the recovery drive, so this could take some time.
4. When it's done, select Finish.
Note:
If you chose not to back up the system files when you created your recovery drive on
Windows 10, you won't be able to use it to reinstall Windows.
Recovery options in Windows 10
If your PC isn't running as quickly or reliably as it used to, try one of these recovery
options. The following table can help you decide which one to use.
Problem
Your PC isn't working well and you recently
installed an app, driver, or update.
Your PC isn't working well and it's been a while
since you installed anything new.
Your PC won't start and you've created a
recovery drive.
Your PC won't start and you haven't created a
recovery drive.
Restore from a system restore point
This option takes your PC back to an earlier point in time, called a system restore point. Restore
points are generated when you install a new app, driver, or Windows update, and when you
create a restore point manually. Restoring won't affect your personal files, but it will remove
apps, drivers, and updates installed after the restore point was made.
1. Right-click (or press and hold) the Start button, and then select Control Panel.
2. Search Control Panel for Recovery.
3. Select Recovery - Open System Restore - Next.
4. Choose the restore point related to the problematic app, driver, or update,
and then select Next - Finish.
Note: If you don't see any restore points, it could be because the system protection isn't turned
on. To check, go to the Control Panel, search for Recovery, and then select Recovery - Configure
System Restore - Configure and make sure that Turn On System Protection is selected.
Fujitsu
Try this
Restore from a system restore point
Reset your PC
Use a recovery drive to reinstall Windows
Use installation media to reinstall Windows
Appendix
112