Fujitsu STYLISTIC Q736 Operating Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Tablet
  5. STYLISTIC Q736
  6. Operating manual

Fujitsu STYLISTIC Q736 Operating Manual

Hide thumbs Also See for STYLISTIC Q736:
Table of Contents

Advertisement

Quick Links

Download this manual
System
Operating Manual
FUJITSU Tablet STYLISTIC Q736

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STYLISTIC Q736 and is the answer not in the manual?

Questions and answers

Related Manuals for Fujitsu STYLISTIC Q736

Summary of Contents for Fujitsu STYLISTIC Q736

  • Page 1 System Operating Manual FUJITSU Tablet STYLISTIC Q736...
  • Page 2 Contact address in North America FUJITSU AMERICA INC. 1250 East Arques Avenue, Sunnyvale, CA 94085-3470, U.S.A. Telephone: 800 831 3183 or 408 746 6000 "http://solutions.us.fujitsu.com" "http://solutions.us.fujitsu.com/contact" Have a question? Email us at: "AskFujitsu@us.fujitsu.com" Copyright © 2016 Fujitsu America, Inc. All rights reserved B5FK-7111-01ENZ0-00...
  • Page 3 FUJITSU Tablet STYLISTIC Q736 Operating Manual Declarations of conformity Fujitsu Contact Information Ports and controls Important notes First-time setup of your device Working with the Tablet PC Accessories for your Tablet PC (optional) Security functions Connecting external devices Settings in BIOS Setup Utility...
  • Page 4 Copyright and Trademark Information Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document.

  • Page 5: Table Of Contents

    Fujitsu Contact Information ........
  • Page 6 Connecting an external monitor ............79 Fujitsu...
  • Page 7 AC adapter 65 W for the Tablet PC ............100 Fujitsu...
  • Page 8 ............. 123 Installing the Software after the Recovery Image is Restored ......124 Fujitsu...
  • Page 9 Index ................. . 129 Fujitsu...
  • Page 10 Contents Fujitsu...

  • Page 11: Declarations Of Conformity

    Telephone: (408) 746-6000 Declares that product: Base Model Configuration: STYLISTIC Q736 Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

  • Page 12: Fujitsu Contact Information

    Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view a list of the most current drivers, utilities and applications to determine whether you have the latest versions. If you have a Windows 7 or Windows 10 operating system, you will need to go to the Support Site to download the FSDM Utility: "http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS".

  • Page 13: Notational Conventions

    Fujitsu Contact Information Notational conventions Pay particular attention to text marked with this symbol. Failure to observe this warning will endanger your life, will damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings.

  • Page 14: Ports And Controls

    1 = Touch screen 6 = Power-on indicator 2 = Webcam 7 = Docking port 3 = Webcam LED 8 = Windows button 4 = Speaker 9 = Ambient light sensor 5 = Mechanical mounting for (power) keyboard docking station / cradle Fujitsu...
  • Page 15 6 = USB port (USB 3.0) 2 = Volume Down button 7 = Combined headphones and microphone port 3 = Volume Up button 8 = Stylus slot 4 = ON/OFF button 9 = Tether eyelet for stylus tether 5 = USB port (USB 2.0) Fujitsu...
  • Page 16 2 = Volume Down button 7 = Combined headphone and microphone port (not visible in diagram) 3 = Volume Up button 8 = Stylus slot 4 = ON/OFF button 9 = Tether eyelet for stylus tether 5 = USB port (USB 2.0) Fujitsu...
  • Page 17 Back (2 variants: without screw holes or with screw holes and Smart Card reader) 1 = Fingerprint sensor 6 = SmartCard reader (device dependent) 2 = Camera light 7 = NFC (Near Field Communication) (device-dependent) 3 = Webcam 4 = Webcam LED 5 = Screw holes (device-dependent) for securing accessories Fujitsu...

  • Page 18: Important Notes

    This Tablet PC complies with the relevant safety regulations for data processing equipment. If you have questions as to whether you can set up the Tablet PC in the intended environment, please contact your sales outlet or our hotline/service desk. Fujitsu...

  • Page 19: Additional Safety Notes For Devices With Wireless Components

    The energy efficiency is increased and environmental pollution is reduced. You save money and help protect the environment. Energy saving under Windows ► Make use of the available energy-saving functions as described in chapter "Using the energy saving functions", Page Fujitsu...

  • Page 20: Traveling With Your Tablet Pc

    Russia and the Commonwealth of Independent States (CIS), much of Europe, parts of Latin America, the Middle East, parts of Africa, Hong Kong, India, much of south-east Asia United Kingdom, Ireland, Malaya, Singapore, parts of Africa China, Australia, New Zealand Fujitsu...

  • Page 21: Transporting The Tablet Pc

    ► To prevent the device from being switched on unintentionally, remove the AC plug of the AC adapter from the power outlet. The surfaces may be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. Fujitsu...

  • Page 22: First-Time Setup Of Your Device

    ► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need to reuse the packaging in the future, for example if you need to ship your device. Fujitsu...

  • Page 23: Choose A Location

    Mounting the feet (only device versions with palm vein sensor) Feet Feet Before initial startup of the above-mentioned device versions, Fujitsu recommends that you mount the supplied feet. ► For how to install the feet, see section "Using the palm vein sensor (device-dependent)", Page...

  • Page 24: Connecting The Ac Adapter

    ► Connect the AC cable (1) to the AC adapter. ► Plug the AC cable (2) into a power outlet. ► Connect the AC adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...

  • Page 25: Switching On The Device For The First Time

    ► Press the ON/OFF button (1) for about one second to switch the device on. The power-on indicators (2) light up whenever the system is switched on. ► During the installation process, follow the on-screen instructions. You can find information and help on the Windows operating system functions online at "http://windows.microsoft.com". Fujitsu...

  • Page 26: Installing Bonus Apps

    There are also cases in which if multiple applications are selected to install but one of them needs a reboot, the system will reboot and continue installing the rest of the selected applications. Fujitsu...

  • Page 27: Working With The Tablet Pc

    "Connecting external devices", Page Please refer to the notes in the chapter "Important notes", Page Status indicators Statusindicators Symbols The status indicators (1, 2, 3) provide information about the statuses of the power supply, the rechargeable batteries and the wireless components. Fujitsu...
  • Page 28 The indicator flashes: The wireless components are switched on while the Tablet PC is in Sleep mode or Save-to-Disk mode, or while the Tablet PC is switched off. • The indicator is not lit up: The wireless components are switched off. Fujitsu...

  • Page 29: Switching The Tablet Pc On

    Working with the Tablet PC Switching the Tablet PC on Tablet:Switching on Power-onPower-onindicator ► Press the ON/OFF button (1) for about one second to switch the device on. The power-on indicators (2) light up whenever the system is switched on. Fujitsu...

  • Page 30: Programming The On/Off Button

    "Screen resolutions for integrated screen and external screens", Page High-quality LCD screens (TFT) are installed in Fujitsu Tablet PCs. For technical reasons, these screens are manufactured for a specific resolution. An optimal, clear picture can only be ensured in the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear picture.

  • Page 31: Background Lighting

    In Windows 10 you can proceed as follows to set the output type: ► Wipe your finger over the screen starting from the right-hand edge. ► Select All settings. ► Look for the keyword "project". ► Select the required function. Fujitsu...

  • Page 32: Select Display Orientation (Portrait Or Landscape Format)

    Operating the device in that position can result in damage to the antenna. Windows 7 You can change these settings in the Fujitsu menu or under Start - (Settings -) Control Panel - Hardware and Sound - Display - Settings.

  • Page 33: Using Fingers

    You can also use the stylus as a drawing tool. A stylus tether is available as an optional extra and you can use this to tie the eyelet on the stylus to the eyelet on the Tablet PC. Fujitsu...
  • Page 34 Tap on the desired element with the Opening a context Click with the right mouse button. menu stylus and keep the stylus pressed against the screen. Moving the cursor Move the mouse Place the tip of the stylus directly on the screen. Fujitsu...

  • Page 35: Stylus Location

    You should also always repeat the calibration if the co-ordination between the stylus and the cursor movement deteriorates. Operating system Menu Windows 7 / Windows To calibrate, run the Hardware and Sound / Tablet PC Settings function in the Control Panel. You need to calibrate both portrait and landscape formats. Fujitsu...

  • Page 36: Securing The Stylus Tether (Optional)

    To prevent accidentally dropping or losing the stylus, you should secure it with the optional stylus tether. ► Attach one end of the stylus cord to the stylus and the other end of the stylus cord to the Tablet PC. Fujitsu...

  • Page 37: Tablet Buttons

    The webcam automatically adjusts itself to the current light level. For this reason, the touchscreen may flicker while the light level is adjusted. Further information on use of the webcam and additional settings for your webcam can be found in the help function of the program using the webcam. Fujitsu...

  • Page 38: Rechargeable Battery

    five minutes of hearing the warning alarm, your Tablet PC will switch off automatically. Monitoring the battery state of charge Battery battery charge meter A battery symbol for monitoring the battery capacity is displayed in the system bar / status indicator. The battery symbol shows you the battery charge. Fujitsu...

  • Page 39: Using The Energy Saving Functions

    ► Set the energy saving functions in your Control Panel. The recommended settings for the Windows energy saving functions are predefined as "Fujitsu Computer EcoSettings" in the Power Options of the Control Panel and can be displayed there.

  • Page 40: Inserting The Memory Card

    ► Press the edge of the memory card so that the memory card jumps (2) slightly out of the slot (a). ► Pull the memory card out of the slot (a) in the direction of the arrow (3). ► Close the slot cover. Fujitsu...

  • Page 41: Sim Card

    ► Remove the SIM card carrier from its location (2). ► Insert the SIM card (3) as shown on the SIM card carrier. ► Push the SIM card carrier back into its location (4). ► Close the slot cover. Fujitsu...

  • Page 42: Removing A Sim Card

    ► Close the slot cover. Wireless LAN/Bluetooth/4G/LTE/NFC wireless components The installation of wireless components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off The wireless components are switched on and off using the appropriate functions of the operating system.

  • Page 43: Access Via Umts

    A mobile end-device (e.g. cellular phone with Bluetooth or cable connection) Access via Wireless WAN You can purchase the accessories for Wireless WAN reception from your Fujitsu dealer. If you have ordered a Wireless WAN module, your device will already be prepared when you receive it.

  • Page 44: Ethernet And Lan

    Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Whether your device has this function depends on the chosen equipment level. Fujitsu...

  • Page 45: Accessories For Your Tablet Pc (Optional)

    Power keyboard docking station with additional ports (with removable battery) • Intermediary VESA Mount Plate • Hand strap • Shoulder strap • Folio case • Protective TPU cover with hand strap • Folio Cover Kit The following sections provide more information on handling the accessories. Fujitsu...

  • Page 46: Your Docking Cradle (Optional)

    Place the cradle on a flat, stable, non-slippery surface. • Never place the cradle or the AC adapter on a heat-sensitive surface. • Do not expose the cradle to extreme environmental conditions. • Protect the cradle from dust, moisture and heat. Fujitsu...

  • Page 47: Connecting The Tablet Pc To The Cradle

    Your cradle is supplied with a separate AC adapter (19 V, 3.42 A). Make sure that you only use this AC adapter for the cradle. ► Position the Tablet PC so that it lies against the storage surface of the cradle. Fujitsu...

  • Page 48: Disconnecting The Tablet Pc From The Cradle

    ► Press the slide-out button in the direction of the arrow (1) until it firmly remains in pressed position (red marking visible). ► While holding down the lower part of the cradle, lift the Tablet PC off the cradle in the direction of the arrow (2). Fujitsu...

  • Page 49: Keyboard Docking Station Or Power Keyboard Docking Station (Optional)

    The (power) keyboard docking station is a device which has been optimized for convenient input of texts and allows external devices to be connected. It only needs to be docked with the tablet PC. Fujitsu...

  • Page 50: Ports On The Keyboard Docking Station Or Power Keyboard Docking Station

    13 = USB ports (3 x USB 3.0) 5 = Battery indicator of the battery in the power keyboard docking station (optional) 6 = Battery charging indicator of the battery in the power keyboard docking station (optional) Fujitsu...
  • Page 51 • The indicator lights up white: The AC adapter is connected and the battery is fully charged / is not being charged. • The indicator is not lit up: The AC adapter is not connected. Fujitsu...

  • Page 52: Station

    ► Connect the AC adapter cable to the DC input connector (DC IN) of the keyboard docking station (2). ► Connect the AC cable to the AC adapter (3). ► Plug the AC cable into the power outlet (4). Fujitsu...

  • Page 53: Station

    ► Press the slide-out button down (1) until it remains in the pressed position (red marking visible). ► Lift the Tablet PC away from the keyboard docking station in the direction of the arrow (2). Fujitsu...

  • Page 54: Removable Rechargeable Battery For The Power Keyboard Docking Station (Optional)

    This section does not apply to the standard keyboard docking station without removable battery! Removing and installing the battery Only use rechargeable batteries approved by Fujitsu for your Tablet PC. Never use force when fitting or removing a battery. Make sure that no foreign bodies get into the battery connections.
  • Page 55 ► Disconnect the catches of the battery compartment cover and open the battery compartment cover (1). ► Lift the battery at the deep point in the middle of the battery compartment and take the battery out of the battery compartment (2). Fujitsu...
  • Page 56 ► Position the rechargeable battery on the edge of the battery compartment and insert the rechargeable battery into the battery compartment (1). ► Insert the catches of the battery compartment cover in the openings on the device (2). ► Close the battery compartment cover (3). Fujitsu...

  • Page 57: Intermediary Vesa Mount Plate (Optional)

    The Intermediary VESA Mount Plate cannot be used in combination with hand or shoulder straps. The Intermediary VESA Mount Plate kit contains the following components: Intermediary VESA Mount Plate, two M2x8 screws and two spacers. Fujitsu...
  • Page 58 Keep the screws out of the reach of children. ► Remove the covers from the screw holes on the rear of the Tablet PC (1). ► Position the spacers between the Tablet PC and Intermediary VESA Mount Plate (2). Fujitsu...

  • Page 59: Hand Strap (Optional)

    The hand strap cannot be used in combination with the Intermediary VESA Mount Plate or shoulder strap. The hand strap accessory contains the following components: Hand straps, two M2x6 screws, two M2x8 screws and two spacers. Fujitsu...
  • Page 60 ► Position the spacers between the Tablet PC and the hand strap (2). ► Position the hand strap on the Tablet PC (3). Make sure that the screw holes of the hand strap and of the Tablet PC lie exactly on top of each other. Fujitsu...

  • Page 61: Shoulder Strap (Optional)

    The shoulder strap cannot be used in combination with the Intermediary VESA Mount Plate or hand strap. The shoulder strap accessory contains the following components: Shoulder strap, two mountings, two M2x6 screws, two M2x8 screws and two spacers. Fujitsu...
  • Page 62 Keep the screws and mountings out of the reach of children. • To prevent damaging the screws, do not use a motorized screwdriver. ► Remove the caps from the screw holes on the rear of the Tablet PC (1). Fujitsu...

  • Page 63: Folio Case (Optional)

    Neither put the folio case in direct sunlight nor expose it to high temperature or humidity. ► Position the Tablet PC on the folio case as shown. The following illustration shows you the many ways in which the folio case can be used: Fujitsu...

  • Page 64: Protective Tpu Cover With Hand Strap (Optional)

    Protective TPU cover with hand strap (optional) Prepare installation ► Remove the soft pad from the hand strap belt (2). ► Loosen and remove the hand strap belt (1). ► Separate the rigid cover (3) from the soft cover (4). Fujitsu...

  • Page 65: Insert The Tablet Pc In The Protective Tpu Cover

    ► Turn over the Tablet PC and soft cover. ► Allow the rigid cover to click into place on the soft cover (3). ► Fit the hand strap belt on the rigid cover, align it and pull it tight (4). Fujitsu...
  • Page 66 Accessories for your Tablet PC (optional) ► Install the soft pad on the hand strap belt (5). ► If required, secure the optional shoulder strap at the four holders (a). Fujitsu...

  • Page 67: Connecting The Tablet Pc To The Keyboard Docking Station Or Cradle

    ► Press the Tablet PC onto the cradle in the direction of the arrow (2). To prevent damage to the system, never fold the Tablet PC on the keyboard docking station if the Tablet PC is in the TPU cover. Fujitsu...

  • Page 68: Folio Cover Kit (Optional)

    ► Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an anti-slip cloth on this surface to prevent the device from being scratched. ► Locate the four inserts on the bottom of the system (1): Fujitsu...
  • Page 69 Be sure that you do not over-tighten the screws. Overtightening the screws could damage the unit. ► Turn over the folio cover and attach the system to the folio cover using the four screws (3) provided in the kit. Use Phillips screwdriver with bit #0: Fujitsu...

  • Page 70: Care Tips For The Folio Cover

    Treat the folio cover as you would a briefcase or purse. • Occasionally, the folio cover may become soiled. To clean it, use a commercially available cleaner and follow the instructions contained with the cleaner. • Never submerge the folio cover in water. Fujitsu...

  • Page 71: Security Functions

    If you forget your passwords you will need to contact our Service Desk. Deletion or resetting of passwords are not covered by your warranty and a charge will be made for assistance. Fujitsu...

  • Page 72: Configuring The Fingerprint Sensor

    The fingerprint sensor can record the image of a fingerprint. With additional fingerprint software, this image can be processed and used instead of a password. ► Install the fingerprint software to be able to use the fingerprint sensor (1). Fujitsu...

  • Page 73: Using The Palm Vein Sensor (Device-Dependent)

    Before initial startup, Fujitsu recommends that you mount the supplied feet: ► Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an anti-slip cloth on this surface to prevent the device from being scratched.
  • Page 74 Security functions ► Secure the feet with the screws (2). ► Install the software to use the palm vein sensor. You can obtain further information on the palm vein sensor in the "appendix: Miscellaneous Information". Fujitsu...

  • Page 75: Using The Security Lock

    Your password can be up to 32 characters long and can contain letters, numbers and special characters. A distinction is made between upper and lower case. When using special characters, please note that these are dependent on the country-specific variant of the keyboard used. Fujitsu...

  • Page 76: Protecting Bios Setup Utility (Supervisor Password And User Password)

    You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password. Password Supervisorpassword User password ► Start the BIOS Setup Utility and go to the Security menu. ► When changing the password, proceed exactly as when assigning a password. Fujitsu...

  • Page 77: Password Protection For Booting The Operating System

    Password protection for the hard disk Passwordprotection The hard disk password prevents unauthorized access to the hard disk drives and is checked internally each time the system is booted. The condition for this is that you have assigned at least the supervisor password. Fujitsu...
  • Page 78 ► If you wish to remove a password for a second hard disk (Drive1), in the area Drive1 mark the field Set Master Password and proceed in exactly the same way as for the removal of the first hard disk (Drive0). Fujitsu...

  • Page 79: Smartcard Reader (Optional)

    Do not use force when inserting and removing the SmartCard. Make sure that foreign objects do not fall into the SmartCard reader. ► Push the SmartCard into the SmartCard reader with the chip facing the rear of the Tablet PC. Fujitsu...

  • Page 80: Trusted Platform Module - Tpm (Device Dependent)

    ► Mark the TPM Security Chip Setting field and press the Enter key. ► Select the entry Disabled to disable the TPM. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The Tablet PC is rebooted and the TPM is disabled. Fujitsu...

  • Page 81: Connecting External Devices

    Dolby Digital or DTS. To play back HDMI sound, you must change the HDMI sound settings accordingly. You can find the settings under Control Panel - Hardware and Sound. Deactivate the settings for DTS Audio and Dolby Digital to enable playback of HDMI sound. Fujitsu...

  • Page 82: Hdmi Port

    You can also switch back and forth between the external monitor and the LCD screen of the Tablet PC, see "Touchscreen", Page You can display the same image on the external monitor and on the LCD screen of the Tablet PC at the same time. Fujitsu...

  • Page 83: Connecting Usb Devices

    ► Tap the symbol for safe removal of the hardware. ► Select the device you wish to shut down and remove. ► Tap OK. Wait for the dialog box which tells you that it is now safe to remove the device. Fujitsu...

  • Page 84: Connecting External Audio Devices

    MP3 player, CD player or a tape deck to your Tablet PC. ► Connect the audio cable to the external device. ► Connect the audio cable to the combined headphones and microphone port of the Tablet PC or to the microphone port of the docking cradle (optional). Fujitsu...

  • Page 85: Settings In Bios Setup Utility

    ► Keep the Volume Down button pressed and switch on the Tablet PC. BIOSSetupUtility ► If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service centre. The BIOS Setup Utility starts. Fujitsu...

  • Page 86: Bios Setup Utility Operation

    ► Select the option you want to change with the cursor keys ↑ ↓ ► Press the "Enter" key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...

  • Page 87: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save changes and power off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...

  • Page 88: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://solutions.us.fujitsu.com"...

  • Page 89: Executing A Reset

    ► Note the ID number of your device. The ID number is found on the type rating plate on the back or underside of the casing. ► For further clarification of the problem, contact the Fujitsu Service Desk. When you do this, please have ready the ID number and serial number of your system.

  • Page 90: Battery Charging Indicator Not Lit

    "Intel Graphics Media Accelerator Driver for mobile". The display on the Tablet PC’s touchscreen is difficult to read. Touchscreen Touchscreen Cause Troubleshooting Reflected glare ► Move the Tablet PC into a different position. ► Increase the brightness of the screen. Fujitsu...

  • Page 91: The External Monitor Remains Blank

    The cursor does not correctly follow the stylus movements Cause Troubleshooting Stylus incorrectly calibrated. ► Calibrate the stylus as described in chapters "Adjusting the stylus", Page 33 "Calibrating the stylus", Page Fujitsu...

  • Page 92: Stylus Input Not Working

    ► Close the application program or restart malfunction. the Tablet PC (by restarting the operating system or switching the device off and back on again). The battery is dead. ► Charge the battery. ► Connect the AC adapter to the Tablet Fujitsu...

  • Page 93: The Printer Does Not Print

    The maximum brightness may have been set ► Reduce the brightness of the screen to for the screen. lower energy consumption: You will find the setting under Control Panel – Hardware and Sounds – Windows Mobility Center. Fujitsu...

  • Page 94: Smart Card Reader Is Not Recognized

    (for a charge). Smart Card lost Cause Troubleshooting Smart Card lost. ► If you work in a network, contact your system administrator, who can boot your Tablet PC with a supervisor Smart Card. Fujitsu...

  • Page 95: Acoustic Warning

    Troubleshooting and tips Acoustic warning Acoustic warnings Errors Cause Troubleshooting A beep sounds every few seconds. ► Charge the battery. The battery is almost dead. Fujitsu...

  • Page 96: Error Messages On The Screen

    This section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programs are described in the documentation for these programs. If the error message appears repeatedly despite troubleshooting measures, contact the place of purchase or our customer service center. Fujitsu...
  • Page 97 ► Contact your sales outlet or our customer service center. System cache error - Cache disabled ► Contact your sales outlet or our customer service center. System timer error ► Contact your sales outlet or our customer service center. Fujitsu...

  • Page 98: Technical Data

    Standard housing with keyboard docking station without battery: 12.56 x 9.76 x 1.17 inches (319 x 248 x 29.6 mm) • Standard housing with power keyboard docking station with battery: 12.56 x 9.76 x 1.33 inches (319 x 248 x 33.8 mm) Fujitsu...

  • Page 99: Wlan Specifications

    Mbps max. data rate; IEEE802.11n: 300 Mbps max. data rate, IEEE802.11ac: 867 Mbps max. data rate Active frequency • 802.11n: 2.4 GHz or 5 GHz • 802.11b/g: 2400~2473 MHz • 802.11a: 4900~5850 MHz • 802.11ac: 2.4 GHz / 5 GHz Fujitsu...
  • Page 100 *** Network key encryption (WEP) occurs with the number of bits given above, after deduction of the fixed length of 24 bits the user may however also set 40 or 104 bits. **** Depending on the particular practical application, the number of computers which can be networked is reduced if necessary. Fujitsu...

  • Page 101: Screen Resolutions For Integrated Screen And External Screens

    @30Hz 2560x1600 @60Hz 1920x1080 1920x1200 @60Hz @60Hz with 4096x2160 cradle / @24Hz keyboard 3840x2160 docking @30Hz 4096x2160 station @24Hz 1920x1080 @60Hz 3840x2160 @30Hz 3840x2160 @30Hz 1920x1080 @60Hz 2560x1600 @60Hz 1920x1080 @60Hz 1920x1080 1920x1080 @60Hz @60Hz 1920x1080 1920x1080 @60Hz @60Hz Fujitsu...

  • Page 102: Rechargeable Battery

    Technical data Rechargeable battery For information on the batteries used in your device, please see "http://solutions.us.fujitsu.com/www/content/support/contact/index.php". 3-cell lithium polymer battery 4,250 mAh Rated voltage 10.8 V Rated capacity 46 Wh AC adapter 65 W for the Tablet PC Technicaldata Rated voltage 19 V Max.

  • Page 103: Ac Adapter 65 W For The Cradle (Optional)

    5 °F ..140 °F / -15 °C ..60 °C Rechargeable battery for power keyboard docking station (device-dependent) For information on the batteries used in your device, please see "http://solutions.us.fujitsu.com/www/content/support/contact/index.php". 3-cell lithium ion rechargeable battery 4170 mAh Rated voltage 10.8 V...

  • Page 104: Intermediary Vesa Mount Plate (Optional)

    / 1.1 lbs. Protective TPU cover with hand strap (optional) Dimensions Width x Depth x Height 332 mm x 220 mm x 29 mm / 13.1 in x 8.7 in x 1.2 in Weight approx. 365 g / 0.8 lbs. Fujitsu...

  • Page 105: Folio Cover Kit For Palm Vein Sensor (Optional)

    Technical data Folio Cover Kit for palm vein sensor (optional) Dimensions Width x Depth x Height 365 mm x 228 mm x 38 mm / 14.4 in x 9 in x 1.5 in Weight approx. 860 g / 1.9 lbs. Fujitsu...

  • Page 106: Manufacturer's Notes

    Remember – protecting the environment is a cooperative effort, and you should make every effort to protect it for current and future generations. * To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site "www.shopfujitsu.com"...

  • Page 107: Ul Notice

    For continued protection against risk of fire, replace only with the same type and rating fuse. WARNING: Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instruction. Fujitsu...

  • Page 108: Energy Star Compliance

    To “wake” the computer from Sleep mode, press the Suspend/Resume Button. Energy saving benefits: Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standard equipment – saving half in utility costs. But more than that, ENERGY STAR also makes a difference for the environment.

  • Page 109: Declarations Of Conformity

    This device complies with Part 15 of the FCC Rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. Fujitsu...

  • Page 110: Fcc Regulatory Information

    In cases in which the policy regarding use of Wireless LAN devices in specific environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment. Fujitsu...

  • Page 111: Regulatory Information/Disclaimers

    2. Increase the distance between the equipment and the receiver. 3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to. 4. Consult the dealer or an experienced radio/TV technician for help. Fujitsu...

  • Page 112: Fcc Radio Frequency Exposure Statement

    : (1) cet appareil ne doit pas causer d’interférence nuisible; (2) cet appareil doit accepter toutes les interférences reçues, y compris celles pouvant causer un mauvais fonctionnement de l’appareil. Toute modification n’ayant pas été expressément approuvée par la société Fujitsu America Incorporated peut annuler le droit de l’utilisateur de se servir du matériel.

  • Page 113: Canada, Industry Canada (Ic)

    In addition, users are cautioned to take note that high power radars are allocated as primary users (meaning they have priority) of 5250 - 5350 MHz and 5650 - 5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Fujitsu...

  • Page 114: Avis Pour Le Canada

    (ce qui signifie qu’ils sont prioritaires) des bandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et qu’ils pourraient causer des interférences et/ou des dommages aux appareils de réseau exempts de licence. Fujitsu...

  • Page 115: Appendix

    That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption key settings are identically configured on all computers in the Ad Hoc network. Fujitsu...
  • Page 116 Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., file servers, printers, databases). Fujitsu...
  • Page 117 Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN devices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput, intermittent disconnects, and many frame errors. It is HIGHLY recommended that these interfering devices be powered off to ensure proper operation of the WLAN device. Fujitsu...

  • Page 118: Deactivating/Disconnecting The Wlan Device

    2. Select Connect to a network. 3. Select a network from the list that appears, and click the Connect button. Troubleshooting the WLAN Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. Fujitsu...
  • Page 119 Access Point (Infrastructure) connection: Retry connection after shortening the distance to the access point or removing any obstacles for better sight. Fujitsu...

  • Page 120: Image Backup And Recovery Procedures

    7 and Backup and Recovery Procedures for Windows 10. Please follow instructions that are applicable to your system’s operating system. Windows® 7 Procedures It is very important that you create DVD copies of your Recovery Image and Bootable Disc before beginning to use your system. Fujitsu...

  • Page 121: Creating A Backup Of Bootable Disc And Recovery Image For Windows 7

    We recommend you to create a backup of the content of the C:\Drivers on your system to writable media or an external drive. System-Specific Software Drivers are also available for download through the Fujitsu support site. WINDOWS 7 RECOVER YOUR SYSTEM WHEN THE...
  • Page 122 To verify/change the boot-up priority (rather than booting-up from the hard drive or an external media drive), perform the following steps: 1. Power on your system. When the Fujitsu logo appears on the screen, press the key. 2. Insert the bootable disc into the drive tray.
  • Page 123 Appendix 3. Choose one or more of the following options for diagnostics on the Fujitsu Hardware Diagnostics Tool window: CPU, Memory, Display, Hard Disk, CD/DVD/BD, Floppy Disc, Keyboard, and Mouse. 4. Click the Option button in the Tool menu to specify how many times the tool should run diagnostics on each selected component.

  • Page 124: Windows 7

    The Partition Creation utility is used to change the C: and D: drive partition sizes. WARNING: It is highly recommended that you send your product to Fujitsu Service to replace a hard drive. A mistake could possibly destroy your computer, your new hard drive or both.)

  • Page 125: Recovering Your Recovery Image Using Recovery And Utility

    If you have installed a new hard drive or your hard drive is not bootable, perform the following steps. Note: You will need the Bootable disc and Recovery Image disc set for this recovery. 1. Power on your system. When the Fujitsu logo appears on the screen, press the key.

  • Page 126: Installing The Software After The Recovery Image Is Restored

    Auto Installation support for the software downloaded from support website 1. Download FSDM (Fujitsu Software Download Manager) from the sup- port site and download all the drivers applicable to the model and OS using FSDM if they are not downloaded yet.

  • Page 127: Create A Recovery Drive

    1. Right-click (or press and hold) the Start button, and then select Control Panel. 2. Search Control Panel for Recovery. 3. Select Recovery -Open System Restore - Next. 4. Choose the restore point related to the problematic app, driver, or update, and then select Next -Finish. Fujitsu...
  • Page 128 Fujitsu, you can use it to reinstall Windows. You will need to install additional drivers and applications after reinstalling Windows. To reinstall Windows, follow the steps below: 1. Power on your system. When the Fujitsu logo appears on the screen, press the key. 2. Insert the bootable disc in your DVD drive.
  • Page 129 A message will be displayed during this time stating Please wait while the content is being processed. 6. If the EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue. 7. The Fujitsu Software Auto Installer user interface will be launched providing the ability to auto install the software downloaded from the support site.

  • Page 130: Downloading Driver Updates

    To ensure that you always have the most current driver updates related to your system, you should occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view and download the most current drivers, utilities and applications to determine whether you have the latest versions.

  • Page 131: Index

    Crystal View screen cleaning 19 Keyboard cleaning 19 Keyboard Dock dark touchscreen 88 Ports 48 Date not correct 87 Keyboard docking station Declarations of conformity 107 Connecting a Tablet PC 50 Display orientation select 30 DOC (INDUSTRY CANADA) NOTICES 104 Fujitsu...
  • Page 132 Ports 44 The wireless connection to a network Keyboard Dock 48 does not work 91 Power saving 17 Time not correct 87 Power-on Power-on indicator 27 Tips 86 Printer does not print 91 Touchpad Problem solving 86 cleaning 19 Fujitsu...
  • Page 133 TPM 78 Transport Damage during transportation 20 Transportation 18 Webcam 35 Travel 18 Winter time 87 Troubleshooting 86 Wireless components Trusted Platform Module 78 Safety notes 17 Wireless LAN Safety notes 17 Wrong date/time 87 USB ports 81 User password Fujitsu...

Table of Contents

Save PDF