Samsung MIM-H03N User & Installation Manual page 13

Multi wi-fi kit
Table of Contents

Advertisement

2) Select one MAC address among searched Wi-Fi kits.
- MAC address can be found on the label inside of Wi-Fi kit.
MAC: XXXXXXX
3) Set tenant address. (Not Support, 0~F)
- Enter tenant address to S-NET pro 2, and it will be applied as below.
Tenant address
Not Support
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
- Ex.) If tenant address 2 is entered on Wi-Fi kit by S-NET pro 2, only indoor units assigned to 2 for RMC1 will be the target of
controlling and monitoring.
4) Click Apply and the tenant address will be saved on Wi-Fi kit.
• Refer to "Setting an indoor unit address and installation option" in installation guide of indoor unit to set indoor unit
group address. (SEG9: 1, SEG11: RMC1)
NOTE
• If you want to reset the tenant address, please contact Samsung service center.
• To control all indoor units classified by tenant addresses with one smartphone, each Wi-Fi kit should be registered
on the smartphone.
• When using multi tenant function by Wi-Fi kit, upper controllers other than OnOff controller (such as Touch
centralized controller, DMS, etc.) can be installed at the same time.
Group channel address of indoor unit controlled by Wi-Fi kit
Control all indoor units connected to outdoor unit
Control indoor units assigned to group channel address 0
Control indoor units assigned to group channel address 1
Control indoor units assigned to group channel address 2
Control indoor units assigned to group channel address 3
Control indoor units assigned to group channel address 4
Control indoor units assigned to group channel address 5
Control indoor units assigned to group channel address 6
Control indoor units assigned to group channel address 7
Control indoor units assigned to group channel address 8
Control indoor units assigned to group channel address 9
Control indoor units assigned to group channel address A
Control indoor units assigned to group channel address B
Control indoor units assigned to group channel address C
Control indoor units assigned to group channel address D
Control indoor units assigned to group channel address E
Control indoor units assigned to group channel address F
13

Advertisement

Table of Contents
loading

Table of Contents