・ Danger; be aware of thrown objects. according to EN786: ・ The distance between the tool and Model DUR141 bystanders must be at least 15 m. Sound pressure level (L ) : 75 dB (A) ・ Keep bystanders away.
WARNING! Read all safety warnings and all Makita Corporation responsible instructions. Failure to follow the warnings and manufacturer declare that the following Makita instructions may result in electric shock, fire and/or machine(s): serious injury. Designation of Machine: Save all warnings and Cordless String Trimmer instructions for future reference.
Page 4
mind that the operator or user is responsible power tools only with specifically for accidents or hazards occurring to other designated battery packs. Use of any other people or their property. battery packs may create a risk of injury and 12.
Page 5
Method of operation Maintenance instructions Never operate the machine with damaged The condition of the cutting tool, protective guards or without the guards in place. devices must be checked before commencing Only use the tool in good light and visibility. work.
Page 6
ENC007-7 Charge the battery cartridge once in every six months if you do not use it for a long period IMPORTANT SAFETY of time. INSTRUCTIONS FOR BATTERY CARTRIDGE Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.
Battery protection system FUNCTIONAL DESCRIPTION (Lithium-ion battery with star marking) WARNING: 1. Star marking Always be sure that the tool is switched off • and battery cartridge is removed before adjusting or checking function on the tool. Failure to switch off and remove the battery cartridge may result in serious personal injury from accidental start-up.
To prevent the switch trigger from being accidentally Indication lamp pulled, a lock-off button is provided. To start the tool, move the lock-off button forward and 1. Indication lamp pull the switch trigger. Release the switch trigger to stop. 012441 Running the tool allows the indication lamp to show the battery cartridge capacity status.
Page 10
Nylon cutting head Installing the front grip NOTICE: 1. Front grip The bump feed will not operate properly if the • 2. Clamping nut Nylon cutting head is not rotating. 3. Hex bolt 1. Nylon cutting head 012394 Put the front grip on the front grip holder and secure it with a hex bolt and the clamping nut provided with the string trimmer as shown in the figure.
Page 11
Installing or removing the Nylon cutting head Winding a new Nylon cord on the spool WARNING: Before installing or removing the Nylon cutting head • (both spool cover and spool, and hereafter called this way), make sure that the tool is switched off and the battery cartridge is removed from the tool.
which leads to the motor under overload, resulting in damage to the trimmer. 012416 Bring the Nylon cord through the Nylon cord eyehole in the spool cover. 012399 1. Spool 2. Nylon cord 012417 012400 After installing the Nylon cutting head, make sure that CAUTION: the Nylon cord comes out by pressing the spool and Use the trimmer without getting the spool into...
Page 13
Cutting the grass near a tree, concrete block, 1. Motor housing brick or garden stone 2. Grip 012405 For using the tool as an edger, hold the shaft of the trimmer with one hand and turn the grip counter 012403 clockwise to loosen the shaft.
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Nylon cutting head • Nylon cords • Shoulder strap •...
Page 16
Makita Corporation Anjo, Aichi, Japan www.makita.com 885314A222...