Table of Contents
Advertisement
Left-hand side
1
1 = Tether eyelet
2 = Combined headphones and microphone
port (audio combo jack)
3 = USB 3.0 port (protected by cover)
4 = microHDMI port (protected by cover)
Right side
1 = Stylus garage
2 = Tether eyelet
Fujitsu
2
3
4
5
6
5 = microSD card slot (protected by cover)
6 = Battery charging indicator (orange)
7 = DC input connector (DC IN)
(protected by cover)
Ports and controls
7
1
2
11
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the STYLISTIC Q Series and is the answer not in the manual?
Questions and answers
I can't reset bios password I forget it
To reset the BIOS password on a Fujitsu STYLISTIC Q Series device, follow these steps:
1. Start the BIOS Setup Utility by pressing the Volume Down button before switching on the tablet.
2. Go to the Security menu.
3. Highlight Set Supervisor Password or Set User Password and press Enter.
4. Enter the current password when prompted.
5. When asked to enter a new password, press Enter twice without typing a new password.
6. In the Exit menu, select Save Changes & Exit.
7. Select Yes and press Enter.
8. The tablet will reboot, and the password will be removed.
Note: Removing the Supervisor Password also deactivates the User Password. If the password is forgotten, contact the system administrator or customer service.
This answer is automatically generated