Table of Contents
Advertisement
®
Bluetooth
(Bluetooth
®
lights when a Bluetooth
(Signal) indicator
lights when a cellular phone is paired and connected,
indicates the intensity of cellular phone's signal wave.
[BAND]
connect, or discon-
®
nect a Bluetooth
device.
[PUSH SEL]
deletes the registration
data.
makes this unit standby
for registration.
Registration of a Bluetooth
to this unit
1
Press one of the preset buttons from
[1] through [6] to select a registration
number assigned to the Bluetooth
device to be registered.
Note: Up to 8 devices memory registered with
preset buttons.
[1] – [5]
: Selects a registration number
(1st page: 1 – 5, 2nd page: 6 – 8)
[6]
: Turns the registration pages
For registration No.6: press [6], then press [1].
For registration No.7: press [6], then press [2].
For registration No.8: press [6], then press [3].
2
Hold down the selected preset button
for more than 2 seconds.
3
Push [SEL] (Select) to make this unit
standby for registration with waiting
status.
Note: To exit waiting status, press [DISP].
4
Operate your Bluetooth
the PIN code for connection. (Default
PIN code is "0000")
Once pairing/registration is successful, the
registered Bluetooth
®
device can automatically
communicate with this unit.
Notes:
¡ The text display of Bluetooth
telephone directory on this unit is only sup-
ported with English characters, other languages
and undisplayable characters/symbols will be
converted into an asterisk ( * ).
22
- General
) indicator
®
device is connected, and blinks during a call.
one is paired and connected,
cellular phone's signal wave.
[1] through [6] (preset buttons)
[s]/[d]
selects a registration number of a
selects a number.
Bluetooth
[6]: sets the PIN code.
¡ If registration is not successfully completed within
®
device
¡ If registration fails because of mismatched PIN
®
¡ Depending on the communication status, it may
Note on operation:
Some Bluetooth
to this unit or, even when connected, the operation
method, displays, and functions may differ from the
instructions within this manual.
For the Bluetooth
with this unit, please visit/consult your dealer to
verify compatibility of your Bluetooth
phones.
Display change
Press [DISP] (Display) to change the
display.
®
device to input
®
device name and
[DISP] (Display)
switches the informa-
tion on the display.
ns)
®
device.
1 minute, "TIME OUT" appears and the screen for
registration number selection resumes.
code, "B/T PIN ERR" appears and the screen for
registration number selection resumes.
takes 5 to 40 seconds for device connection.
®
devices/Phones may not connect
®
devices/Phones to be supported
[SRC]
selects a
source.
Registration
number
(M1 – M8)
®
devices or
Registered device
name (Example)
Clock
Advertisement
Table of Contents
