13. TECHNICAL INFORMATION................. 22 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Page 3
ENGLISH manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
Do not leave the appliance with the open door • unattended to avoid stepping accidentally onto it. Before any maintenance operation, deactivate the • appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam •...
ENGLISH • Ensure that there are no visible water • Dishwasher detergents are leaks during and after the first use of dangerous. Obey the safety the appliance. instructions on the detergent • The water inlet hose has a safety valve packaging.
Filters Detergent dispenser Rating plate Cutlery basket Salt container Lower basket Air vent Upper basket Rinse aid dispenser 3.1 TimeBeam When AirDry is activated during the drying phase, the The TimeBeam is a display that is shown projection on the floor may on the floor below the appliance door.
ENGLISH 4.1 Indicators Indicator Description End indicator. Rinse aid indicator. It is always off while the programme operates. Salt indicator. It is always off while the programme operates. 5. PROGRAMMES Programme Degree of soil Programme phases Options Type of load •...
Page 8
Programme Degree of soil Programme phases Options Type of load • Normal or light • Wash 45 °C • XtraDry soil • Rinses • Delicate crock- • Dry ery and glass- ware 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil.
ENGLISH 5.2 Information for test info.test@dishwasher-production.com institutes Write down the product number (PNC) that is on the rating plate. For all the necessary information for test performance, send an email to: 6. SETTINGS 6.1 Programme selection After activation, the appliance is in programme selection mode by default.
Page 11
ENGLISH not possible to deactivate these acoustic • The display shows a number and signals. letter C. Each number refers to a different colour. There is also an acoustic signal that – = TimeBeam sounds when the programme is deactivated. completed.
1. To enter the user mode, press and • The indicator still flashes. hold simultaneously until • The display shows the current the indicators setting: = AirDry activated. start flashing and the display is 3. Press to change the setting: blank.
ENGLISH not come on or it flashes quickly for a The display shows the updated few seconds and then goes off. programme duration. 8. BEFORE FIRST USE 1. Make sure that the current level of the water softener agrees with the hardness of the water supply.
1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam.
Page 15
ENGLISH • 5 minutes after the completion of the If the door is opened for programme. more than 30 seconds • After 5 minutes if the programme has during the drying phase, the not started. running programme ends. It does not happen if the door Starting a programme is opened by AirDry function.
10. HINTS AND TIPS 10.1 General we recommend that you use the tablets with long programmes. The following hints will ensure optimal • Do not use more than the correct cleaning and drying results in daily use quantity of detergent. Refer to the...
ENGLISH • Make sure that the spray arm can • The correct quantity of detergent is move freely before you start a used. programme. 10.6 Unloading the baskets 10.5 Before starting a 1. Let the tableware cool down before programme you remove it from the appliance.
CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object.
Page 19
ENGLISH solve the problem by yourself with the With some problems, the display help of the information in the table or shows an alarm code. contact an Authorised Service Centre. The majority of problems that can occur can be solved without the need WARNING! to contact an Authorised Service Repairs not properly done...
Page 20
Problem and alarm code Possible cause and solution The program lasts too long. • Select the TimeSaver option to shorten the program time. • If the delayed start option is set, cancel the delay setting or wait for the end of the countdown.
Page 21
ENGLISH Problem Possible cause and solution Poor drying results. • Tableware has been left for too long inside a closed appliance. • There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level. •...
Problem Possible cause and solution Limescale deposits on the ta- • The level of salt is low, check the refill indicator. bleware, on the tub and on • The cap of the salt container is loose. • Your tap water is hard. Refer to "The water softener".
Page 23
ENGLISH your local recycling facility or contact your municipal office.
Need help?
Do you have a question about the COMFORTLIFT 9000 and is the answer not in the manual?
Questions and answers