Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for AEG FSK31610Z
Summary of Contents for AEG FSK31610Z
- Page 1 FSK31610Z User Manual Dishwasher USER MANUAL...
-
Page 2: Table Of Contents
12. TECHNICAL INFORMATION................21 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. - Page 3 ENGLISH of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a...
-
Page 4: Safety Instructions
If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Put the cutlery in the cutlery basket with the sharp •... - Page 5 ENGLISH 2.4 Use be replaced, this must be carried out by our Authorised Service Centre. • Do not put flammable products or • Connect the mains plug to the mains items that are wet with flammable socket only at the end of the products in, near or on the appliance.
-
Page 6: Product Description
2.7 Disposal displays, pressure switches,... -
Page 7: Control Panel
ENGLISH Upper basket 4. CONTROL PANEL On/off button Programme button Programme indicators Delay button Indicators 4.1 Indicators Indicator Description Running programme indicator. It comes on when the programme starts and goes off when the programme is completed. End indicator. Rinse aid indicator. It is always off while the programme operates. Salt indicator. -
Page 8: Settings
Programme Degree of Programme Consumption values soil phases 1)2) Type of load Duration Energy Water (min) (kWh) Heavy soil • Prewash 1.052 - 11.1 - 13.6 Crockery, cut‐ • Wash 70 °C 1.285 lery, pots and • Rinses pans •... - Page 9 ENGLISH How to set the programme flashes and the indicators selection mode are on. The appliance is in programme selection 6.2 The water softener mode when the programme indicator flashes. The water softener removes minerals After activation, the appliance is in from the water supply, which would have programme selection mode by default.
- Page 10 When the prescribed quantity of water All the consumption values (see values in the table) has been used mentioned in this section are since the previous regeneration process, determined in accordance a new regeneration process will be with the currently applicable...
-
Page 11: Before First Use
ENGLISH 1. Press the programme button CAUTION! immediately. Do not try to close the • The indicator appliance door within 2 minutes after automatic opening. This can cause • The indicator flashes. damage to the appliance. 2. Wait until the indicator AirDry is automatically activated with all are off. -
Page 12: Daily Use
7.1 The salt container CAUTION! Water and salt can come out CAUTION! of the salt container when Use rough salt designed for you fill it. After you fill the dishwashers only. Fine salt salt container, immediately increases the risk of start a programme to corrosion. - Page 13 ENGLISH 8.1 Using the detergent Starting a programme with delay start 1. Set a programme. 2. Press Delay to delay the start of the programme by 3 hours. The indicator is on. 3. Close the appliance door to start the countdown.
-
Page 14: Hints And Tips
Cancelling the programme 1. Press the on/off button or wait for the appliance to switch to standby mode. Press and hold the programme button If you open the door before the until the appliance is in programme activation of standby mode, the selection mode. - Page 15 ENGLISH results in detergent residues on the • Put hollow items (cups, glasses and dishes. Adjust the amount of pans) with the opening facing detergent based on the water downwards. hardness. Refer to the instructions on • Make sure that glasses do not touch the detergent packaging.
-
Page 16: Care And Cleaning
10. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a 4. Wash the filters. check regularly and, if necessary, clean them. -
Page 17: Troubleshooting
ENGLISH • If you regularly use short duration programmes, these can leave deposits of grease and limescale inside the appliance. To prevent this, we recommend to run long duration programmes at least 2 times per month. • To maintain the performance of your appliance at its best, we recommend to use monthly a specific cleaning product for dishwashers. - Page 18 Problem and alarm code Possible cause and solution You cannot activate the appliance. • Make sure that the mains plug is connected to the mains socket. • Make sure that there is no damaged fuse in the fuse box.
- Page 19 ENGLISH Problem and alarm code Possible cause and solution The temperature of the water inside • Make sure that the temperature of the inlet wa‐ the appliance is too high or malfunc‐ ter does not exceed 60°C. tion of the temperature sensor occur‐ •...
- Page 20 Refer to "Before first use", WARNING! "Daily use", or "Hints and We do not recommend using tips" for other possible the appliance until the causes. problem has been completely fixed. Unplug the Once you have checked the appliance, appliance and do not plug it deactivate and activate the appliance.
-
Page 21: Technical Information
ENGLISH Problem Possible cause and solution Unusual foam during washing. • Use the detergent for dishwashers only. • There is a leak in the rinse aid dispenser. Contact an Authorised Service Centre. Traces of rust on cutlery. • There is too much salt in the water used for washing. Refer to "The water softener". - Page 22 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8) Water supply max 60 °C Cold water or hot water Capacity Place settings Power consumption Left-on mode (W) Off-mode (W) 0.50...
- Page 24 www.aeg.com/shop...
Need help?
Do you have a question about the FSK31610Z and is the answer not in the manual?
Questions and answers