Warranty And Support; Technical Specifications; Troubleshooting - Philips Lumea BRI923/60 Manual

Warranty and support

Recycling

Technical specifications

Rated voltage
Rated frequency
Rated input
Protection against electric shock
Protections rating
Operating conditions
Storage conditions temperature
Storage conditions humidity
Operating pressure
Altitude
Emitted wavelengths
Optical exposure
Maximum optical energy
Pulse duration
Repetition time
Optical homogeneity

Troubleshooting

If you need information or support, please visit www.philips.com/support or
read the international warranty leaflet.
- Do not throw away the product with the normal household waste at the
end of its life, but hand it in at an official collection point for recycling. By
doing this, you help to preserve the environment.
- Follow your country's rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative
consequences for the environment and human health.
SC1994, SC1997, SC1998, SC1999
100 V - 240 V
50 Hz - 60 Hz
36 W
Class II
IP 30 (EN 60529)
Temperature:+15 ºC to 35 °C
-25 °C to 60 °C
Less than 90% (non condensing)
700 hPa - 1060 hPa
Max. 2000 m
530 nm - 1400 nm
2.5 - 5.0 J/cm², depending on chosen setting
20 J
<1.5 ms
1-3.5 s, depending on chosen setting
Max. +/- 20% deviation from average optical exposure in
treatment area
This chapter summarizes the most common problems you could encounter
with the device. If you are unable to solve the problem with the information
23
English