Settings
Consumption (EcoFeedback)
You can set whether the energy and
water consumption is displayed for the
selected programme. This function
shows the estimated consumption be-
fore a programme, and the actual con-
sumption after the end of the pro-
gramme.
In this menu you can also call up the
total consumption of energy and water
for all the wash programmes you have
previously run on your dishwasher (see
"Caring for the environment" chapter,
"EcoFeedback consumption "display
section).
Display Consumption
Select the
Display
confirm with OK.
Select the setting you want and con-
firm with OK.
Display Total consumption
Select the
Total consumption
tion and confirm with OK.
You can display the values for
using the sensor con-
and
Water
trols.
You can also reset the values for the
total consumption to 0.
Select the
Reset
confirm with OK.
Select the
menu option and con-
Yes
firm with OK.
Confirm the message with OK.
The values are now reset to 0.
114
menu option and
menu op-
Energy
menu option and
Display brightness
You can set the display brightness to
one of seven different levels.